different interval?

[ant]

I have a timer control and it's interval = 0.9. Then i have another timer control it's interval = 9.5. When the second timer times out, It's supposed to unload the form. The problem is when i test out the program, it automatically unloads the form. both timer's intervals were 0.9. But 1 was supposed to be 9.5. Help!!!!!!!!!!!

--Ant
--------------------------------------------------
check out my newest freeware
E-mail me at: christopherfolger@hotmail.com
for the address

[Harini]

Hello,

Try setting the interval of the second timer on Form_load

Thanks
Harini

[ant]

i set both of them in the form load


--Ant
--------------------------------------------------
check out my newest freeware
E-mail me at: christopherfolger@hotmail.com
for the address

[Cimperiali]

a timer can be set from 55 ms on (til about 60000)
If you set it under 55, it will be as you have not done under.
a difference of 0.5 or 5 millisecond is not perceptible by you. You can see (if you are fast) differences of about 20- 50 ms

Special thanks to Lothar "the Great" Haensler, Tom Archer, Chris Eastwood, Bruno Paris and all the other wonderful people who made and make Codeguru a great place. Come back soon, you Gurus.

[Harini]

Try increasing the time interval with a noticable amount of difference between the two timers.

If this works out, it means the code is working out for your present time intervals also.

Thanks
Harini

[shree]

Didn't I warn you about your use of timers in

http://codeguru.com/cgi-bin/bbs/wt/showpost.pl?Board=vb&Number=53340

[Cimperiali]

You did, I do remember. Maybe there's another "memory leack" matter around here...
;)

Special thanks to Lothar "the Great" Haensler, Tom Archer, Chris Eastwood, Bruno Paris and all the other wonderful people who made and make Codeguru a great place. Come back soon, you Gurus.

[Clearcode]

Remember that the interval property is measued in thousandths of a second.
If you want your timer to trigger after .9 seconds, set this value to 900 - for 9 and a half seconds, set this value to 9500.

HTH,
D.

-------------------------------------------------
Ex. Datis: Duncan Jones
Merrion Computing Ltd
http://www.merrioncomputing.com