How can I receive data from a PBX machine after I get gonnected to it?

Hello there I'm encountering an issue recently and been searching more than two months but haven't found a solution for it yet. I have to write a program/application (which I already started in VB.NET 2010) that connects through Panasonic KX-TEM824 PBX machine via RS232 port (cable already connected : COM15/16 depending on USB I connect) and while it's connected to parse(receive) the data from the PBX itself, data that has caller ID, time of call started and ended, duration of the call and etc. I have found some already application on the Internet that does the work but they are free to try after awhile requires to buy or restart the app again. But I assume there's not much to implement on the code side. Please I really need help. I'm posting code below. P.s. it's for study purpose.

Imports System
Imports System.ComponentModel
Imports System.Threading
Imports System.IO.Ports
Public Class frmMain
Dim myPort As Array 'COM Ports detected on the system will be stored here
Delegate Sub SetTextCallback(ByVal [text] As String) 'Added to prevent threading errors during receiveing of data

Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'When our form loads, auto detect all serial ports in the system and populate the cmbPort Combo box.
myPort = IO.Ports.SerialPort.GetPortNames() 'Get all com ports available
cmbBaud.Items.Add(9600) 'Populate the cmbBaud Combo box to common baud rates used
cmbBaud.Items.Add(19200)
cmbBaud.Items.Add(38400)
cmbBaud.Items.Add(57600)
cmbBaud.Items.Add(115200)

For i = 0 To UBound(myPort)
cmbPort.Items.Add(myPort(i))
Next
cmbPort.Text = cmbPort.Items.Item(0) 'Set cmbPort text to the first COM port detected
cmbBaud.Text = cmbBaud.Items.Item(0) 'Set cmbBaud text to the first Baud rate on the list

btnDisconnect.Enabled = False 'Initially Disconnect Button is Disabled

End Sub

Private Sub btnConnect_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnConnect.Click
SerialPort1.PortName = cmbPort.Text 'Set SerialPort1 to the selected COM port at startup
SerialPort1.BaudRate = cmbBaud.Text 'Set Baud rate to the selected value on

'Other Serial Port Property
SerialPort1.Parity = IO.Ports.Parity.None
SerialPort1.StopBits = IO.Ports.StopBits.One
SerialPort1.DataBits = 8 'Open our serial port
SerialPort1.Open()

btnConnect.Enabled = False 'Disable Connect button
btnDisconnect.Enabled = True 'and Enable Disconnect button

End Sub

Private Sub btnDisconnect_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisconnect.Click
SerialPort1.Close() 'Close our Serial Port

btnConnect.Enabled = True
btnDisconnect.Enabled = False
End Sub

Private Sub btnSend_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSend.Click
SerialPort1.Write(txtTransmit.Text & vbCr) 'The text contained in the txtText will be sent to the serial port as ascii
'plus the carriage return (Enter Key) the carriage return can be ommitted if the other end does not need it
End Sub

Private Sub SerialPort1_DataReceived(ByVal sender As Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) Handles SerialPort1.DataReceived
ReceivedText(SerialPort1.ReadExisting()) 'Automatically called every time a data is received at the serialPort
End Sub
Private Sub ReceivedText(ByVal [text] As String)
'compares the ID of the creating Thread to the ID of the calling Thread
If Me.rtbReceived.InvokeRequired Then
Dim x As New SetTextCallback(AddressOf ReceivedText)
Me.Invoke(x, New Object() {(text)})
Else
Me.rtbReceived.Text &= [text]
End If
End Sub

Private Sub cmbPort_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmbPort.SelectedIndexChanged
If SerialPort1.IsOpen = False Then
SerialPort1.PortName = cmbPort.Text 'pop a message box to user if he is changing ports
Else 'without disconnecting first.
MsgBox("Valid only if port is Closed", vbCritical)
End If
End Sub

Private Sub cmbBaud_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmbBaud.SelectedIndexChanged
If SerialPort1.IsOpen = False Then
SerialPort1.BaudRate = cmbBaud.Text 'pop a message box to user if he is changing baud rate
Else 'without disconnecting first.
MsgBox("Valid only if port is Closed", vbCritical)
End If
End Sub
End Class

Well first of all you did not tell us what you are having a problem with and secondly you did not use Code tags so your code is unreadable.

Rtfm!

Quote:

---

to programme and administer the pbx by pc (personal computer), you need to install kx-te maintenance
console onto the pc. To install and start kx-te maintenance console when the pc and the pbx are
connected, refer to the installation manual ( 3.1.1 installing kx-te maintenance console on a pc). Kxte
maintenance console starts the programme using the drive where you installed the software
automatically.

---

Yeah sorry about tags for codes didn't work somehow or (I'm new to this forum and don't really know how to use special formatting for my code). The problem stands that I cannot insert any data to my TextBox after I get connected. Don't know what kind of codes should I really use. As I explained it earlier I have a Panasonic KX-TEM824. I've been reading that each of the PBX machines have their own modulation of bytes to characters.

The whole code there works but doesn't show me resulsts...I get to connect the Panasonic with the app but nothing happens after that no result.

Thanks for giving time to read my question.

Ok I started to download the maitenance console app for KX-TEM. I'll refer to you in future if I counterfeit any issue or problem...and I hope it's not only in Russian language developed since I don't understand a thingy. Thnx for the quote. Been very helpful.

Quote:

---

Originally Posted by dglienna

Rtfm!

---

Most Comm's with the PABX require's you to poll it for information..

Send a command to it to start logging the info.
It will respond OK..
Send command to retrieve info
It will respond with data..

then you also have to ensure you decode the data correctly..

I already did application which receives the data from the PBX machine whenever it fires the DataReceived event of the serial port control. One thing I for sure don't know is that what do you mean by polling? Because once I've read briefly a thread that there are two ways of receiving data and one of them was by polling.

That's for sure that usually I don't get any data unless there are some already stored data that had to be transferred through the RS232 port to my app or if those were already logged until there is any call received or made by company employees. If you need the code to see there's another thread made by me in this forum. You can find it out here:

http://www.codeguru.com/forum/showth...33#post2056433

Quote:

---

Originally Posted by Venn

I already did application which receives the data from the PBX machine whenever it fires the DataReceived event of the serial port control. One thing I for sure don't know is that what do you mean by polling? Because once I've read briefly a thread that there are two ways of receiving data and one of them was by polling.

---

Polling the data =

Quote:

---

Originally Posted by GremlinSA

Send a command to it to start logging the info.
It will respond OK..
Send command to retrieve info
It will respond with data..

(Repeat command to retrieve info - Over and Over)

---