Originally posted by Cyrus
I created a parameter passing in crystal reports so user can enter what records need to be printed i.e idnumber, is there a way to capture the parameter passed to a textbox.
10x
cyrus
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Hello K.Babu, I've tried your suggestion. These files : craxdrt.dll, craxddrt.dll, crpe32.dll crviewer32.dll, crystl32.ocx, rdwiz.dll had been included in the list of files to be installed. But after I've tried, the error message is "Physical database not found" Can you find out, which file that I missed to be included in my installation files.. Eh, I 've also tried to install crystal report 8.5 to the destination computer and my program was working. I think, there must be a file or some files that I missed, like I mention above. Can you tell me which file is it, according to error message " Physical database not found"? Thank you for your kindly help!
Regards,
Aan H.
Originally posted by K.Babu
Hi,
Yes, I also face the same problem, which you mention bellow regarding package wizard, I don't want to R&D why package wizard not support that, so that, i written the setup script in Install Shield.
You can try by change the VB setup project manually. you have to Include all the crystal report runtime files in cab file. which is mentioned in Crystal Report Developer Runtime help document.
Note: Keep in mind, what are the files you have to register with regsvr32.exe, This details are mentioned in Developer runtime help document file.
Thanks,
K.Babu.
Last edited by aan_handoko; November 28th, 2003 at 02:20 AM.
I think you are using RDC Method, that's no required crystl32.ocx, Find out the RDC Method Engine Runtime Requirement Files.
IF you have not, i will give you ok.
Regards,
K.Babu
Originally posted by aan_handoko
Hello K.Babu, I've tried your suggestion. These files : craxdrt.dll, craxddrt.dll, crpe32.dll crviewer32.dll, crystl32.ocx, rdwiz.dll had been included in the list of files to be installed. But after I've tried, the error message is "Physical database not found" Can you find out, which file that I missed to be included in my installation files.. Eh, I 've also tried to install crystal report 8.5 to the destination computer and my program was working. I think, there must be a file or some files that I missed, like I mention above. Can you tell me which file is it, according to error message " Physical database not found"? Thank you for your kindly help!
Regards,
Aan H.
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Private Sub Form_Load()
Dim mum As Integer
num = Vendas_clientes.txtID_VENDA.Caption
num = num + 0
Screen.MousePointer = vbHourglass
If Not (Report.ParameterFields.item(1).CurrentValue = num) Then
Report.ParameterFields.item(1).AddCurrentValue (num)
how can i based on the printer name (but if need more information is easy aquired)
select a printer for the report to be printed in runtime
i have selected a specifeid printer for each report but i may need to print the report to a network printer and same times a local printer
i easaly get the printer names
Dim pr As Printer
'
'
'
'Private Sub CmdPrinter_Click()
' For Each pr In Printers
' Combo1.AddItem pr.DeviceName
' Next
'End Sub
now i need to send the report for one of the printers
1. I have a field in an Access database that is a Date/Time field and contains times. When I add this field to my Crystal Report it is displayed as a date instead of a time. How do I change the formatting?
2. The report has a summary field that adds all of the minutes that have elapsed but because the field is a numeric field, rather than a time field, the summary will show things like 253 minutes. How can I get the report to calculate minutes before printing?
Hello !
i want to ask a question.
can i use crystal reports instead of a listview control in order to
display results in the same manner like the listview?
moreover i want that when i click on a columnheader that the
records are ordered according to this column.
so i want a columnheader_click event or something like that.
is there a tutorial for doing all this stuff ?
thanks !
Public Sub BUSH()
Do while Not isEmpty(World)
Kill World.Country(1)
Loop
End Sub
I use CR with Visual C++ 6.0 and I don't use CR Active X viewer because it does not export correct the reports.
Instead, I access the reports preview using "cpeaut32.h" (ICRApplication, ICRReport, ICRView etc.).
I need to pass some parameters at runtime to the report, but I couldn't find a way. There is a an interface ICRParameterFieldDefinition but i couldn't figure how to use it.
It would be very helpful an advice or example about how can I can do this.
Hello Dear Babu,
Nice to meet you through this forum. I am developing some Crystal Reports in Version 8.
These are not ordinary reports where we can connect to one database from report and so on...
My problem is i have many databases, in them more than one table in each database.
R:\\2000\WM5.mdb
R:\\2001\WM5.mdb
R:\\2002\WM5.mdb and so on for each year.
I have one database of each type for every year in R drive. and i designed my reports accordiing to Client.
Now from VB 6.0 front end interface i have to select Year(2002,2003 etc) , DatabaseName and product number etc. When i click display report it has to search in the particular MDB i selected and should display corresponding data of the record(given product number).
Simply this is a Dynamic report generation.
PLease help me in doing this.
I have designed reports and GUI also.
Now i need code from which i can generate reports according to the user selection of Year, database, table name and product number.
NOTE: the database has same structure for all years.
The tables has same no.of fields and names of the fields are also same...
Hi, I Really need help with this unsolved problem, the problem is actually come when i try to send parameter value from ASP page to crystal report with stored procedure parameter...
In this link i have the unsolved problem for passing parameter with uniqueidentifier value .....
hi,
i keep getting an unknown query engine error each time add a java bean as a data source, i looked it up on the crystal decisions forum and followed their tips to resolve the issue , i am still unable to do it.
Any help would be useful.
I also have another question, if i have a report generating a chart from an oracle table. I have displayed it using a jsp, but i need it to be refreshed each time the data in the tables changes. which i am unable to do.
I want to insert pictures into my report, this pictures are stored a sqlserver 2000 database in an image type field and i am working in Cristal Reports for Visual Studio .Net. I need a report with a table, where in each row i must insert the picture of each employee of my company.
I have some problems with a crystal report that has two subreports.
Problem is that for some reason I do not get anything on the subreports. It would be ok if there is not information matching with the parent, but there really is information that matches with the parent detail.
If I remove the link between the parent and the subreport, I get the whole list. So, for some reason filtering is not working properly. Main report and 2 subreports are based on ttx files. The field I am using to link subreports with the parent is a uniqueidentifier type. Does anybody has a clue about this?
I made a test creating new reports but instead of using ttx files I am using the stored procedures directly and they are working fine. The problem here is the architecture of the app was designed to use ttx files and they are fed at run time with the recordsets coming from the sp's I am using on the test.
I will really appreciate your help because I have spent too much time on this. Thanks.
Can any one help me in getting the euro symbol in crystal report which can be exported into MS Excel while scheduling the report.
I can see the symbol in crystal output, but not in excel file.
I've read about that sample that you gave to me, about SAmple to make report over the web, but the problem is i can't pass the parameter value.....not how to preview it....maybe u can't read the problem carefully...cause i feel my problem is weird.....and i get mad of this problem,coz ake me stuck on this too long for my project...thx anyway
* The Best Reasons to Target Windows 8
Learn some of the best reasons why you should seriously consider bringing your Android mobile development expertise to bear on the Windows 8 platform.