-
December 18th, 2002, 11:21 PM
#166
Re: how to set pagesize
hi,
Set 'Printer Setup' in crystal report design mode, you can change printer properties with custom paper size
yours,
K.Babu
Originally posted by shashibhushan
Dear Babu
I have made a project for which i need to set page size of 7.5''x8''
with printer driver not supporting this size(note that my printer is DMP.) Is there any way to explicitly define the page size for output.
Regards
Shashi bhushan
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
December 19th, 2002, 08:04 PM
#167
Crystal Error - File Not Found
Hi all this one is kind of weird,
I thought Crystal's run time licenses were free? Here is my code:
Set Appn = CreateObject("CrystalRunTime.Application")
Set cReport = Appn.OpenReport("D:\Programming Projects\Work Proposal\Take4\Reports\ViTriage.rpt")
Then if I add a watch value to cReport and expand the properties, I get a message box from Crystal that says that this api is not free and that I need to purchase it. I then get a:
"Error opening File
File could not be found in 'tblViHeader', at location 'tblViHeader'"
The file does exist at that location. Is this some type of weird legitimate error or is this because I do not have the correct version of craxdrt.dll or crviewer.dll. Or, is this because of my code?
What is weird is that the code that references tblViHeader comes a few lines down.
It was working and it just all of a sudden stopped.
Any ideas?
Thanks in advance!
Bob
-
December 19th, 2002, 09:12 PM
#168
Crystal Report
i wish to make a cube or olap (just like in cognos powerplay) in crystal 8.5. could you guys give some tips/ step by step procedure or any documentation will show me how to do it ?
thanks in advance
-
December 19th, 2002, 10:48 PM
#169
VC++ export to EXCEL
Hi,
We have created a Visual C++ .NET program that uses Crystal Reports to export reports to files. The PDF files look great but, the EXCEL files force themselves into rows and columns.
When I use crystal to export the files to EXCEL I can get them to come out right when I choose
column width based on objects in the whole report from the Excel Format Options dialog box.
How do I do this programmatically?
Thanks
Gary
-
December 20th, 2002, 05:57 AM
#170
Crystal Report!
Hello Mr K.Babu
I know how to design an report by Crystal Report but I do not know how to transfer database from Accscess to Crystal Report (I use Visual Basic and design Report by DataReport in VB6 but it can print Landscape orientation, that why I use Crystal report. )
Can you tell me how can i tranfer database from Access to Crystal Report .
Thanks a lot
-
December 22nd, 2002, 03:54 PM
#171
Hi, Mr. K. Babu:
I want to prepare a set of forms(PDF) from MDB database, could I load data from the database and fill in the field in the forms autumaticly by using Crystal Report ?
Thanks,
Mark,
-
December 23rd, 2002, 03:51 PM
#172
Question, maybe tricky, maybe not!
I want to create a report with the following in mind:
Code:
Table Layout
ProjectID | ComponentID | Stack | Level | Position
----------------------------------------------------------------
10001 | 401 | 0 | 0 | 1
10001 | 402 | 0 | 0 | 3
10001 | 403 | 0 | 1 | 1
10001 | 404 | 0 | 1 | 1
10001 | 405 | 0 | 2 | 0
10001 | 406 | 0 | 2 | 1
10001 | 407 | 0 | 2 | 3
10001 | 408 | 0 | 2 | 4
10001 | 409 | 0 | 3 | 2
10001 | 410 | 1 | 0 | 1
10001 | 411 | 1 | 0 | 3
The Previous table should generate the following output:
Code:
Project ID: 10001
----------------------------------------------------------------------
409
405 406 407 408
403 404
401 402
______________________________
410 411
----------------------------------------------------------------------
I am using crystal reports version 7.0 professional. I cannot use the cross tabs to create this report because of limitations I found with it.
What I need to know, is given the table shown above, how can I position the Component on my report based on the Stack, Level, and Position fields of the records retrieved. The output must resemble that shown above.
I use C++, ADO, and MS Access is the database.
Mike B
-
December 23rd, 2002, 10:05 PM
#173
Re: Crystal Error - File Not Found
I think this is not a code error, reinstall yours crystal report again, make sure the related custom options are checked correctly.
yours,
k.Babu
Originally posted by Delamater
Hi all this one is kind of weird,
I thought Crystal's run time licenses were free? Here is my code:
Set Appn = CreateObject("CrystalRunTime.Application")
Set cReport = Appn.OpenReport("D:\Programming Projects\Work Proposal\Take4\Reports\ViTriage.rpt")
Then if I add a watch value to cReport and expand the properties, I get a message box from Crystal that says that this api is not free and that I need to purchase it. I then get a:
"Error opening File
File could not be found in 'tblViHeader', at location 'tblViHeader'"
The file does exist at that location. Is this some type of weird legitimate error or is this because I do not have the correct version of craxdrt.dll or crviewer.dll. Or, is this because of my code?
What is weird is that the code that references tblViHeader comes a few lines down.
It was working and it just all of a sudden stopped.
Any ideas?
Thanks in advance!
Bob
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
December 23rd, 2002, 10:19 PM
#174
Re: VC++ export to EXCEL
Hi friends,
why do you need EXCEL format?, if your data like a word document, you can try export to some other format
yours,
K.Babu
Originally posted by ghoran
Hi,
We have created a Visual C++ .NET program that uses Crystal Reports to export reports to files. The PDF files look great but, the EXCEL files force themselves into rows and columns.
When I use crystal to export the files to EXCEL I can get them to come out right when I choose
column width based on objects in the whole report from the Excel Format Options dialog box.
How do I do this programmatically?
Thanks
Gary
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
December 24th, 2002, 03:21 AM
#175
Re: Question, maybe tricky, maybe not!
Hi friends,
Create cross tab query in access itself, then you can directly use the query in crystal reports design time.
yours,
k.Babu
Originally posted by MikeB
I want to create a report with the following in mind:
Code:
Table Layout
ProjectID | ComponentID | Stack | Level | Position
----------------------------------------------------------------
10001 | 401 | 0 | 0 | 1
10001 | 402 | 0 | 0 | 3
10001 | 403 | 0 | 1 | 1
10001 | 404 | 0 | 1 | 1
10001 | 405 | 0 | 2 | 0
10001 | 406 | 0 | 2 | 1
10001 | 407 | 0 | 2 | 3
10001 | 408 | 0 | 2 | 4
10001 | 409 | 0 | 3 | 2
10001 | 410 | 1 | 0 | 1
10001 | 411 | 1 | 0 | 3
The Previous table should generate the following output:
Code:
Project ID: 10001
----------------------------------------------------------------------
409
405 406 407 408
403 404
401 402
______________________________
410 411
----------------------------------------------------------------------
I am using crystal reports version 7.0 professional. I cannot use the cross tabs to create this report because of limitations I found with it.
What I need to know, is given the table shown above, how can I position the Component on my report based on the Stack, Level, and Position fields of the records retrieved. The output must resemble that shown above.
I use C++, ADO, and MS Access is the database.
Mike B
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
December 24th, 2002, 03:29 PM
#176
Crystall report on Win XP
Babu,
I have Crystal Report Ver. 7.00 which runs very nice on Win 2000 but not on Win XP. I am sure Seagete are not stupid to this degree. Do you have a solution to keep it running on Win XP.
-
December 25th, 2002, 02:47 AM
#177
Re: Crystall report on Win XP
What problem you face in XP OS, when using crystal report.
yours,
k.Babu
Originally posted by camelriding
Babu,
I have Crystal Report Ver. 7.00 which runs very nice on Win 2000 but not on Win XP. I am sure Seagete are not stupid to this degree. Do you have a solution to keep it running on Win XP.
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
December 25th, 2002, 12:00 PM
#178
Crystall report on Win XP
In design stage there is no problem. But at run time I get
(Method 'Action' of object 'CrystalCtl' failed)
Run-Time Error '-2147417848 (80010108)'
Thanks in advance
-
December 25th, 2002, 10:21 PM
#179
Re: Crystall report on Win XP
If you can able to view print preview at design time, that it may be crystal report control problem, try after reinstall the crystal report
yours,
k.Babu
Originally posted by camelriding
In design stage there is no problem. But at run time I get
(Method 'Action' of object 'CrystalCtl' failed)
Run-Time Error '-2147417848 (80010108)'
Thanks in advance
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
December 26th, 2002, 09:04 AM
#180
Crystall report on Win XP
Babu,
Sorry about what I said in the previous message. In design time I get some errors. The current error I got today is:
CRPaige library CRPaige(32).DLL cannot be found.
It should be on the path.
I search all the hard disk for this file but it does not exist.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Click Here to Expand Forum to Full Width
|