-
February 18th, 2003, 06:04 AM
#271
Re: I WANT TO RECORD COLUMNWISE
Create new crystal report, select the report type custom mail label.
Originally posted by atul_tak
HELLO SIR ,
i want to print address in two columns
how to do that in crystal report
waiting for u r reply
like
Atul Tak mahen Raja
Subhash Road Komal Colony
Mantri Galli plot no 25
Beed Rohtak
like this
hot acheive it
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
February 19th, 2003, 06:29 AM
#272
changing the print document name
Hi,
to use a crystal reports print with a special fax printer driver, i have to assign different names to the print jobs, as they appear later in the printer queue. Crystal reports always names the print job like this: "Seagate Crystal Reports - reportname.rpt". Is there a way to change this. Im using the crpe32m.lib and vc++.
Thanks,
Winni
-
February 23rd, 2003, 10:55 PM
#273
CR7 Paginated Text Export oprion at W2k
Dear K. Babu
I'm using CR7 with vb6. I export the reports at win95,98 and me, I did not found any problem. Currently trying to use at W2k and xp, found the text fields are truncated.
I'v tried to enlarge the text field size, it resolve but the paper size (fanfold 3) available is not sufficient to fit the report
I hope you can guide me on this issue.
Thank You.
-
February 24th, 2003, 04:12 PM
#274
Crystal Report and Record number !!!
Hello,
I've designed my report by Crystal Report 8.5
And right now i'm using Crystal Report ActiveX in my project.
I'm looking for a way to show the report of a special record number, directly.
For example, i wanna show the report of Record number 4.
NEED FOR SPEED
Is there any way ?
Regards,
-
February 25th, 2003, 12:53 AM
#275
Re: CR7 Paginated Text Export oprion at W2k
Change the font, and then try again.
Originally posted by parri
Dear K. Babu
I'm using CR7 with vb6. I export the reports at win95,98 and me, I did not found any problem. Currently trying to use at W2k and xp, found the text fields are truncated.
I'v tried to enlarge the text field size, it resolve but the paper size (fanfold 3) available is not sufficient to fit the report
I hope you can guide me on this issue.
Thank You.
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
February 25th, 2003, 01:06 AM
#276
Re: Crystal Report and Record number !!!
Hi,
At menu bar click insert menu, select the "Insert Record Field" to view the record numbers.
if you want to customize the record number put the "Insert Record Field" in formula field, use (if <condition> then ... else ...) conditions, refer other command used for formula fields like this.
Originally posted by Hadi Rezaie
Hello,
I've designed my report by Crystal Report 8.5
And right now i'm using Crystal Report ActiveX in my project.
I'm looking for a way to show the report of a special record number, directly.
For example, i wanna show the report of Record number 4.
NEED FOR SPEED
Is there any way ?
Regards,
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
February 25th, 2003, 10:36 AM
#277
K.Babu,
I was just curious if there is a way that I could have a VB Data Environment and then use it for the Crystal Reports? I do not have Crystal Designer for my Visual Basic application or I just can not find it on my VB. I looked into the Components and no Crystal Designer.
John-
-
February 25th, 2003, 03:09 PM
#278
Hello dear K.Babu and thanks for reply.
But i wanna get the report directly in the program, not in Crystal Report IDE.
As i told u i'm using CR 8.5 activex.
What's ur idea ?
Regards,
-
February 25th, 2003, 10:25 PM
#279
Hi,
Make sure your crystal report version had RDC feature.
Originally posted by vbjohn
K.Babu,
I was just curious if there is a way that I could have a VB Data Environment and then use it for the Crystal Reports? I do not have Crystal Designer for my Visual Basic application or I just can not find it on my VB. I looked into the Components and no Crystal Designer.
John-
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
February 25th, 2003, 10:31 PM
#280
Hi,
Yes you can change the record number using with RDC component events, pass value through formula fields.
Originally posted by Hadi Rezaie
Hello dear K.Babu and thanks for reply.
But i wanna get the report directly in the program, not in Crystal Report IDE.
As i told u i'm using CR 8.5 activex.
What's ur idea ?
Regards,
Last edited by K.Babu; February 25th, 2003 at 10:33 PM.
Please avoid sending emails to my personal mail:
write your doubts as thread in Codeguru
Crystal Reports Forum.
This will help all people having similar matters, and will let people who know solutions on the specific topic
share their knowledge.
Visit my company web site (Qmax Test Equipments Private Limited)
Yours friendly,
K.Babu
-
February 26th, 2003, 09:04 AM
#281
Hi Babu
I have a little Problem whit Crystal and the SupportTeam from Crystaldecsision
I have many Problems whit Images.
I want print a dynamic Image whit a path in my database.
I CAN'T save BLOB-Files and run no other programm, while printing. OLE Object dosn't work, "Hyperlinks" only exist virtuel and not on the paper.
I want only use a dynamic Image from a path. All image have the same size and resolution.
THX4HELP
BoBi
PS: Versions Crystal 8.0, 8.5, 9.0
-
February 26th, 2003, 09:29 AM
#282
It does not look like I have the RDC feature. I have Crystal Reports 8.5. Where would I look to find out if I do have it?
John-
-
February 26th, 2003, 01:33 PM
#283
Help in sorting out the mess
Hey,
Right now I am using different csv files and feed them to the crystal report tempelates that i have made,one for each csv file.
print each of the tempelates to pdf.
then combine the reports to get me the final report .
all this is done manually
I want to automate this so that I dont have to print each of the reports to pdf.
do that for all the csv file reports
then combine them to get a final report.
as all this takes a lot of time.
Basically what i want to do is if possible read from all the csv files in one tempelate and make my tempelate such that the generic info like the information about the test etc whose data is there in the csv files is included as well.
If you can help it would be great.
I can use VC++ for this.
Take Care
-
February 26th, 2003, 05:19 PM
#284
hmm, RDC ?
Crystal Report Designer Component.
Can u explain more about this component ?
I wasn't familier with this one.
Anyway, i can use Formula in Crystal Report ActiveX.
-
February 26th, 2003, 07:45 PM
#285
Crystal 9 and VB
I'm looking for a direct answer to a question. I've found lots of good suggestions, but none seem to address my specific need.
I have VB 6 front-ending a SQL Server backend. I have some stored procedures that I used to create CR 9 reports. So I've got my front-end, and I've got my reports; now how do I call them? I'm essentially a one man shop, so I don't have a lot of brain power to pull from.
The reports have approximately three sub-reports each, which if I read right can be a problem. The CR components I have are (according to the Components screen in VB):
- CR Analysis Common Controls 2.0,
- CR File Dialog Library 2.0,
- CR Report Viewer Control,
- CR Report Viewer Control 9,
- CR Repository Explorer Type Library and
- CR Expert OLE Control module.
I know this is basic stuff to most of you. But like I said, I'm a one-man band.
Thanks in advance...
Randy
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Click Here to Expand Forum to Full Width
|