-
August 18th, 2004, 12:33 PM
#1
Color Detection Algorithm
I am trying to write an algorithm for detection of the color green. The thing is that if I try detecting the shade of a pixel in a picture, there are more than a million different shades possible. How do I sift thourgh all these different shades and detect which ones are green ? Does anyone know of a simple way to do it or of any prevelant algorithms that does it for you ?
-
August 18th, 2004, 08:58 PM
#2
Assuming that your picture uses some form of RGB format to store the color for per pixel, you can distinguish if the color of a pixel is green if both red and blue colors are zero.
-
August 19th, 2004, 08:19 AM
#3
One of the most popular methods used for this puprose is using the vector distance. I've used this in the past for detecting colors and it works fine. Here is a brief explanation:
Let's say you are searching for "green" pixels. Pure green exists when the values of the pixels are:
R = 0
G = 255
B = 0
Though, when searching for green you may want to have a "tolerance" meaning that you don't only search for pure green, but also for some other green-like combinations. Suppose that each pixel is a vector:
pixel = [R G B]
Also, the color combination you are looking for is another vector:
green = [0 255 0] (reference color)
The eucledian distance between those 2 vectors is:
D = sqrt((R-0)^2 + (G-255)^2 + (B-0)^2)
(in the place of 0 and 255 you can place whatever you want, according on the color combination you are looking for...)
So the algorithm goes:
Code:
for each pixel
{
1. compute the distance between that pixel and the reference color (D)
2. if D<Threshold
then
current pixel is accepted
else
current pixel is NOT accepted
}
PS1: "Threshold" is a constant value and has to bee set manually according on the "tolerance" you want to give to your algorithm (a high value of Threshold means that also less "clear" green pixels will be considered as green, whereas a lower value of Threshold will make the algorithm quite "strict").
PS2: Threshold can also be computed using addaptive algorithms but this is quite difficult
PS3: I've tested this simple algorithm using Matlab and it works fine, so if interested tell me to send you the code.
Hope this helped u.
-
August 19th, 2004, 08:26 AM
#4
Also, you could try image segmentation technuiqes like:
- fuzzy logic
- k - means vector quantization
-
August 28th, 2004, 02:31 PM
#5
Re: Color Detection Algorithm
I think you should give more tolerance to the brightness. To do so, norm the color vectors by 1 and then distance is distance between the resulting vectors+some cooff*difference in length.
"Programs must be written for people to read, and only incidentally for machines to execute."
-
August 30th, 2004, 09:17 AM
#6
Re: Color Detection Algorithm
Nice idea RoboTact. Though, that depends on what the seach is done for. Maybe the user doesn't want to give tolerance to brightness. But if he does, then you are right, that by normalizing the RGB coefficients he achieves that.
Another way to do this is to execute histogram equalisation in each coefficient (R,G,B), or even better to transform the RGB matrix to HSI and perform histogram equalisation to the I coefficient only.
-
February 27th, 2007, 03:09 PM
#7
Re: Color Detection Algorithm
hello yiannakop
please i want the matlab code because i need it urgently and as fast as possible in my graduation project thnx a lot.
-
March 5th, 2007, 07:51 AM
#8
Re: Color Detection Algorithm
please i want the matlab code ,it's very urgent
my mail is kimohoss@hotmail.com
please iu want it as soon as possible
-
March 5th, 2007, 11:27 AM
#9
Re: Color Detection Algorithm
You realize this post is almost 2 years old. It's possible Theodore isn't reading this forum anymore.
Viggy
-
March 26th, 2007, 06:39 AM
#10
Re: Color Detection Algorithm
Well, that's true, I had not read the thread for a long period of time.
Anyway, probably it's too late, but here some code I wrote for color detection (though, the pseodo code I had given was, in my opinion quite clear and easy to be transposed to matlab code).
Anyway, the following code is a matlab function that takes the following arguments:
1) RGB: a MxNx3 matrix of the RGB values
2) mode: this argument should take the values 1,2 or 3, depending on the color you want to detect (red, green or blue).
3) thres: a threshold that is used to detect the desired color in the following way: if the desired color is LARGER than thres * (each of the other two colors), then the current pixel is labelled as 1 (color found).
Code:
function I = findColor(RGB, mode, thres)
% function BIN = findColor(RGB, rgbVal, Thres)
% Function for detecting a specific rgb value, within acceptable tollerance
% RGB: the rgb image
% mode: the color to detect:
% 1: red
% 2: green
% 3: blue
% thres: the distance tollerance
[M,N,t] = size(RGB);
switch (mode)
case 1
I1 = zeros(M,N); I2 = zeros(M,N);
I1( find(RGB(:,:,1) > thres * RGB(:,:,2)) ) = 1;
I2( find(RGB(:,:,1) > thres * RGB(:,:,3)) ) = 1;
strTitle = 'Color RED detected (white areas)';
I = I1 .* I2;
case 2
I1 = zeros(M,N); I2 = zeros(M,N);
I1( find(RGB(:,:,2) > thres * RGB(:,:,1)) ) = 1;
I2( find(RGB(:,:,2) > thres * RGB(:,:,3)) ) = 1;
strTitle = 'Color GREEN detected (white areas)';
I = I1 .* I2;
case 3
I1 = zeros(M,N); I2 = zeros(M,N);
I1( find(RGB(:,:,3) > thres * RGB(:,:,1)) ) = 1;
I2( find(RGB(:,:,3) > thres * RGB(:,:,2)) ) = 1;
strTitle = 'Color BLUE detected (white areas)';
I = I1 .* I2;
otherwise
fprintf('WRONG ARGUMENTS'\n);
return;
end
subplot(2,1,1),imshow(RGB); title('Original Image');
subplot(2,1,2),imshow(I,[]); title(strTitle);
-
April 8th, 2005, 10:37 PM
#11
Re: Color Detection Algorithm
How does HSV work? I've never heard of it
In C, you merely shoot yourself in the foot.
In C++, you accidentally create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical care is impossible, because you can't tell which are bitwise copies and which are just pointing at others and saying, "That's me, over there."
-
April 11th, 2005, 07:55 AM
#12
Re: Color Detection Algorithm
Whereas RGB represents the Red, Green and Blue components of a color, HSV represents the Hue, Saturation, and Value (light- or dark-ness) components. Some feel it is a better match with the way humans think about color. You can covert RGB colors to HSV using the algorithm found here: http://www.cs.rit.edu/~ncs/color/t_convert.html
--
Scott
-
April 11th, 2005, 08:21 AM
#13
Re: Color Detection Algorithm
HSV and HSI are 2 very similar color models. HSV stands for:
- H (hue): Ranges from 0-360. In some cases it is normalized 0-100. Hue represents the COLOR type (e.g. blue, red etc).
- S (saturation): Ranges from 0-100. It represents the "purity" of the color: the higher saturation value is, the clearer the color is. If saturation is low, the color looks closer to gray.
- V (value): This is the brightness of the color, and it ranges from 0-100.
HSV model is sometimes represented as a cone. Try find a tutorial for explanation on this.
How to convert from RGB to HSV:
Suppose you have (R,G,B) values:
MAX = max(R,G,B)
MIN = min(R,G,B)
then:
H = ((G-B)/(MAX-MIN))*60 if MAX = R
(2+(B-R)/(MAX-MIN))*60 if MAX = G
(4+(R-G)/(MAX-MIN))*60 if MAX = B
S = (MAX-MIN)/MIN
V = MAX
Hope it helps,
Theodore
-
September 28th, 2010, 01:14 PM
#14
Re: Color Detection Algorithm
anyone know how to recognize skin color in java~ do help me~very urgent~
-
October 8th, 2010, 12:08 AM
#15
Re: Color Detection Algorithm
Originally Posted by juana
anyone know how to recognize skin color in java~ do help me~very urgent~
Now, more than one week after your post, I'd like to mention that when I pointed you to this thread, I meant you should read it rather than post in it. Considering the age of the thread, I think it's unlikely that the members who wrote it are still monitoring it, at least not on a regular basis.
Didn't reading the thread give you any useful information?
I was thrown out of college for cheating on the metaphysics exam; I looked into the soul of the boy sitting next to me.
This is a snakeskin jacket! And for me it's a symbol of my individuality, and my belief... in personal freedom.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Click Here to Expand Forum to Full Width
|