CodeGuru Home VC++ / MFC / C++ .NET / C# Visual Basic VB Forums Developer.com
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2011
    Pune, India

    Memory Trace Project

    Hi guys,

    I hope to get your valuable inputs to this pet project of mine, please do feel free to mention your ideas, suggestions and recommendations for the same. This is my personal project without any academic monitoring so I am definitely looking for some guidance from your experience.

    I've collected a huge number of memory traces almost 10 GB of data (physical memory). These memory traces were gathered from a set of servers, desktops, and laptops in a university CS Department. Each trace file contains a list of hashes representing the contents of the machine's memory, as well as some meta information about the running processes and OS type.

    The traces have been grouped by type and date. Traces were recorded approximately every 30 minutes, although if machines were turned off or away from an internet connection for a long period, no traces were acquired. Each trace file is split into two portions. The top segment is ASCII text containing the system meta data about operating system type and a list of running processes. This is followed by binary data containing the list of hashes generated for each page in the system. Hashes are stored as consecutive 32bit values. There is a simple tool called "traceReader" for extracting the hashes from a trace file. This takes as an argument the file to be parsed, and will output the hash list as a series of integer values. If you would like to compare to traces to estimate the amount of sharing between them, you could run:

    ./traceReader trace-x.dat > trace-all
    ./traceReader trace-y.dat >> trace-all
    cat trace-all | sort | uniq -c

    This will tell you the number of times that each hash occurs in the system.

    Now my idea is to take the trace for every interval (every 30 mins) for each of the systems and find the frequency of each memory hash. I then plan to collect the highest frequencies (hashes maximally occurring) of the entire hour (60 mins) and then divide the memory into 'k' different patterns based on the count of these frequencies. Like for instance say hashes 14F430C8 ,1550068, 15AD480A, 161384B6, 16985213, 17CA274B, 18E5F038 and 1A3329 have the highest frequencies then I might divide the memory into 8 patterns (k=8). I plan to use the Approximate Nearest neighbor algorithm (ANN) for this division. In ANN one needs to provide a set of query points, data points and dimensions. I guess in my case my query points can be all the remaining hashes other than the highest frequency ones, the data points are all the hashes for the hour and dimension can be 1. I can thus formulate the memory patterns for every hour, I then plan to formulate memory patterns for every 3 hrs, 6 hrs, 12 hrs and finally all the 24 hrs. Armed with these statistics, I plan to compare the patterns based on the time of the day. I hope to provide certain overlap with the patterns and create what I call as "heat zones" for memory based on the time of the day and finally come up with a suitable report for the same.

    The entire objective of this project is to provide a sort of relation between the memory page access and the interval of time of the day. So for specific intervals there are certain memory "heat zones". I understand that these "heat zones" might change and may not be consistent with every system and user. The study here intends to only establish this relationship and doesn't do any kind of qualitative or quantitative analysis of these heat zones per system and user. The above can be considered to be an extension of this work.

    Please feel free to comment and suggest for any new insights

  2. #2
    Join Date
    Feb 2011
    United States

    Re: Memory Trace Project

    Sure, sounds fine, I guess. What do you hope to gain from this project?
    Best Regards,

    All advice is offered in good faith only. You are ultimately responsible for effects of your programs and the integrity of the machines they run on.

  3. #3
    Join Date
    Aug 2011
    Pune, India

    Re: Memory Trace Project

    There are two aspects to this project.

    1. Find out about the processes running most frequently at a particular time interval on different systems (this may be an easier option)
    2. Go deeper to the physical memory(PM) trace and find the relationship between the PM addresses and most frequent access per universal time clock per system.

    I understand that with address space randomized mappings and with different systems running different processes it might be very hard to find any suitable pattern emerging from this study. But as most of us know that identical systems belonging in a particular network and during a time frame might end up accessing similar PM blocks. (A block here being groups of pages) I intend to find if there is any kind of correlation between this time frame and the access. According to the working set model of a system, there exits a temporal and spatial locality of memory page access and hence we end up using the appropriate page replacement algorithms. Now I intent to see if this same analogy can be applied to the entire memory address space for access. I mean if there exists some sort of a pattern emerging for physical memory access based on time and space.

    I hope to know if there has been any similar work done before with memory traces or if there are any other areas which I need to look into before I can begin this study.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Windows Mobile Development Center

Click Here to Expand Forum to Full Width

On-Demand Webinars (sponsored)

We have made updates to our Privacy Policy to reflect the implementation of the General Data Protection Regulation.