-
October 10th, 2011, 12:15 PM
#1
Building exe from existing source
Hi,
I have the source code for an RTS game (+- 240 MB in size). When trying to build it in Visual 2010 it will ask me to convert it and then I get a lot off errors.
The source was written around the year 2003-2005. Could someone advise which version off Visual I should be using to build the executable without having to convert it?
If more information is needed, just ask.
Thanks in advance for any answer.
Regards
-
October 10th, 2011, 01:05 PM
#2
Re: Building exe from existing source
What kind of errors are you getting?
-
October 11th, 2011, 09:03 AM
#3
Re: Building exe from existing source
Here's how I proceeded, step by step:
File-Open-Project/Solution->Project.sln
Next Conversion wizard loads
I click on Next (no back up) Next
Then it starts converting 1 of 11 projects ( Cossacks2, DipServer, IntExplorer, IChat, CommCore, LF_Server ,ClassEngine, gMOtor, MissionEngine, Launcher, NiceVopyl)
When finished it gives a popup:
"The project cossacks2.vcxproj appears to be under source control, but the associated source control plug-in is not installed on this computer. Source control will be disabled for this project."
I click Ok
Next popup:
"The project IntExplorer.vcxproj appears to be under source control, but the associated source control plug-in is not installed on this computer. Source control will be disabled for this project."
I click ok
(it goes trough all 11 projects with same popup)'
Loading Solution
Preparing Solution...
Next Pop-Up:
" The associated source control plug-in is not installed or could not be initialized":
(3 Options: )
-Temporarily work uncontrolled
-Work offline in disconnected mode ( greyed out)
-Permanently remove source control association bindings ( I choose this one)
Preparing solution....
Conversion complete: "All projects converted succesfully with some warnings. Please see the conversion log for complete information"
No errors but a lot off warnings. One off the 11 projects ( Cossacks2) in the solution has 54 warnings.
Upgrade log2.xml :
I cant seem to attach an .xml here ( not a valid attachment) and pasting the content makes the post too long ( over 20 000 characters) (how can I show the errors?)
Then it continues:
Parsing files in solution....
Scanning included files...
Parsing included files...
Ready
Then I choose Build Solution.
And then the following errors come up:
Code:
------ Skipped Build: Project: CommCore, Configuration: Debug Win32 ------
Project not selected to build for this solution configuration
------ Build started: Project: gMotor, Configuration: Release Win32 ------
Build started 11/10/2011 15:47:04.
InitializeBuildStatus:
Creating ".\../../_release/gMotor\gMotor.unsuccessfulbuild" because "AlwaysCreate" was specified.
MakeDirsForCl:
Creating directory "C:\Users\RebelAngel\Desktop\cossakcs2_patch01\3dlib\gMotor\.\..\..\_release\gMotor\asm".
ClCompile:
stdafx.cpp
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(231): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(232) : see reference to class template instantiation 'Singleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(252): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(253) : see reference to class template instantiation 'PSingleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\mSegmentSet.h(43): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\rsVertex.h(116): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
Build FAILED.
Time Elapsed 00:00:09.39
------ Build started: Project: cossacks2, Configuration: Release Win32 ------
Build started 11/10/2011 15:47:14.
InitializeBuildStatus:
Creating ".\../_release3d_inl/vc6\cossacks2.unsuccessfulbuild" because "AlwaysCreate" was specified.
ClCompile:
stdheader.cpp
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(231): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(232) : see reference to class template instantiation 'Singleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(252): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(253) : see reference to class template instantiation 'PSingleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\mSegmentSet.h(43): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\rsVertex.h(116): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
C:\Users\RebelAngel\Desktop\cossakcs2_patch01\ClassEngine\ClassEngine.h(296): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\TopoGraf.h(70): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\TopoGraf.h(71): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\TopoGraf.h(72): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(767): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(767): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(767): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(768): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(769): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(771): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(771): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(771): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(771): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(772): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(774): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(777): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(779): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\VideoLayer.h(6): fatal error C1083: Cannot open include file: 'd3d8.h': No such file or directory
Build FAILED.
Time Elapsed 00:00:11.57
------ Skipped Build: Project: ClassEngine, Configuration: Release Win32 ------
Project not selected to build for this solution configuration
------ Skipped Build: Project: LF_Server, Configuration: Debug_CII Win32 ------
Project not selected to build for this solution configuration
------ Skipped Build: Project: MissionEngine, Configuration: Release Win32 ------
Project not selected to build for this solution configuration
------ Build started: Project: Launcher, Configuration: Release Win32 ------
Build started 11/10/2011 15:47:26.
InitializeBuildStatus:
Creating "Release\Launcher.unsuccessfulbuild" because "AlwaysCreate" was specified.
ClCompile:
stdafx.cpp
Launcher.cpp
MakeDirsForLink:
Creating directory "q:\".
C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppBuild.targets(1029,5): error MSB3191: Unable to create directory "q:\". Could not find a part of the path 'q:\'.
Build FAILED.
Time Elapsed 00:00:05.04
------ Skipped Build: Project: IChat, Configuration: Debug_CII Win32 ------
Project not selected to build for this solution configuration
------ Skipped Build: Project: IntExplorer, Configuration: Debug_CII Win32 ------
Project not selected to build for this solution configuration
------ Skipped Build: Project: DipServer, Configuration: Debug Win32 ------
Project not selected to build for this solution configuration
------ Build started: Project: NiceVopyl, Configuration: Release Win32 ------
Build started 11/10/2011 15:47:32.
InitializeBuildStatus:
Creating "Release\NiceVopyl.unsuccessfulbuild" because "AlwaysCreate" was specified.
ClCompile:
stdafx.cpp
NiceVopyl.cpp
NiceVopyl.cpp(137): warning C4800: 'BOOL' : forcing value to bool 'true' or 'false' (performance warning)
NiceVopyl.cpp(226): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
e:\Microsoft\Visual\VC\include\stdio.h(371) : see declaration of 'sprintf'
NiceVopyl.cpp(235): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
e:\Microsoft\Visual\VC\include\string.h(105) : see declaration of 'strcpy'
VopylClasses.cpp
VopylClasses.cpp(29): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
e:\Microsoft\Visual\VC\include\string.h(105) : see declaration of 'strcpy'
VopylClasses.cpp(291): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
e:\Microsoft\Visual\VC\include\string.h(105) : see declaration of 'strcpy'
VopylClasses.cpp(532): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
e:\Microsoft\Visual\VC\include\stdio.h(371) : see declaration of 'sprintf'
Generating Code...
MakeDirsForLink:
Creating directory "q:\".
C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppBuild.targets(1029,5): error MSB3191: Unable to create directory "q:\". Could not find a part of the path 'q:\'.
Build FAILED.
Time Elapsed 00:00:14.14
========== Build: 0 succeeded, 4 failed, 0 up-to-date, 7 skipped ==========
So I need some advice, I'm not sure whether its the version off Visual, the environment or the setup I'm working with. Or all 3 ;-)
-
October 12th, 2011, 01:48 AM
#4
Re: Building exe from existing source
Could someone advise which version off Visual I should be using to build the executable without having to convert it?
That one you have a project for in the sources. Look up for .sln/.vcproj files. The required version is specified inside.
Best regards,
Igor
-
October 12th, 2011, 02:54 AM
#5
Re: Building exe from existing source
Originally Posted by RebelAngel
...
Then I choose Build Solution.
And then the following errors come up:
Code:
------ Skipped Build: Project: CommCore, Configuration: Debug Win32 ------
Project not selected to build for this solution configuration
------ Build started: Project: gMotor, Configuration: Release Win32 ------
Build started 11/10/2011 15:47:04.
InitializeBuildStatus:
Creating ".\../../_release/gMotor\gMotor.unsuccessfulbuild" because "AlwaysCreate" was specified.
MakeDirsForCl:
Creating directory "C:\Users\RebelAngel\Desktop\cossakcs2_patch01\3dlib\gMotor\.\..\..\_release\gMotor\asm".
ClCompile:
stdafx.cpp
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(231): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(232) : see reference to class template instantiation 'Singleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(252): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(253) : see reference to class template instantiation 'PSingleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\mSegmentSet.h(43): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\rsVertex.h(116): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
Build FAILED.
Time Elapsed 00:00:09.39
------ Build started: Project: cossacks2, Configuration: Release Win32 ------
Build started 11/10/2011 15:47:14.
InitializeBuildStatus:
Creating ".\../_release3d_inl/vc6\cossacks2.unsuccessfulbuild" because "AlwaysCreate" was specified.
ClCompile:
stdheader.cpp
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(231): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(232) : see reference to class template instantiation 'Singleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(252): error C2649: 'typename' : is not a 'class'
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\kTemplates.hpp(253) : see reference to class template instantiation 'PSingleton<T>' being compiled
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\mSegmentSet.h(43): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\3dlib\gmotor\rsVertex.h(116): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
C:\Users\RebelAngel\Desktop\cossakcs2_patch01\ClassEngine\ClassEngine.h(296): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\TopoGraf.h(70): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\TopoGraf.h(71): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\TopoGraf.h(72): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(767): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(767): error C2065: 'i' : undeclared identifier
c:\users\rebelangel\desktop\cossakcs2_patch01\cossacks2\ClassEditor.h(767): error C2065: 'i' : undeclared identifier
...
C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppBuild.targets(1029,5): error MSB3191: Unable to create directory "q:\". Could not find a part of the path 'q:\'.
Build FAILED.
Time Elapsed 00:00:14.14
========== Build: 0 succeeded, 4 failed, 0 up-to-date, 7 skipped ==========
- About error C2649: 'typename' : is not a 'class'
- About error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
- About error C2065: 'i' : undeclared identifier
- error MSB3191: Unable to create directory "q:\" - does the drive q: exists on your PC?
Victor Nijegorodov
-
October 12th, 2011, 04:55 AM
#6
Re: Building exe from existing source
Originally Posted by RebelAngel
So I need some advice, I'm not sure whether its the version off Visual, the environment or the setup I'm working with. Or all 3 ;-)
Most of those errors are due to the later versions of Visual C++ being ANSI C++ compliant.
You cannot "convert" these errors -- you need to fix them, since the code you're compiling uses illegal C++ constructs.
Regards,
Paul McKenzie
-
October 12th, 2011, 06:27 AM
#7
Re: Building exe from existing source
That one you have a project for in the sources. Look up for .sln/.vcproj files. The required version is specified inside.
I looked inside and it says version 8.0. So I'll install the 2005 version and see if that is any better. Thanks for that suggestion.
error MSB3191: Unable to create directory "q:\" - does the drive q: exists on your PC?
Meh, no I do not have a q: drive. An C: and an E: I have.
Most of those errors are due to the later versions of Visual C++ being ANSI C++ compliant.
You cannot "convert" these errors -- you need to fix them, since the code you're compiling uses illegal C++ constructs.
Understood. I'll try with an earlier version off Visual C++ rather than fixing these errors myself and creating possibly more problems. Thanks
-
October 12th, 2011, 06:40 AM
#8
Re: Building exe from existing source
(Can't find no edit my post button, hope you dont mind double posting)
As said in previous post. I opened the .sln file and it stated following:
"Microsoft Visual Studio Solution File, Format Version 8.00
Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cossacks2", "COSSACKS2\cossacks2.vcproj", "{60D954A2-8B83-46E3-9BCF-B614117E2F7D}"
I read that as Version 8.00, hence Visual 2005, so I installed it but on running that version and opening the solution it's asking me to convert again, saying it was created in a previous version.
What am I missing here? ( And should I install an even earlier version? 2003?)
-
October 12th, 2011, 07:22 AM
#9
Re: Building exe from existing source
Originally Posted by RebelAngel
What am I missing here? ( And should I install an even earlier version? 2003?)
Better would be fixing the errors...
Victor Nijegorodov
-
October 12th, 2011, 08:14 AM
#10
Re: Building exe from existing source
Originally Posted by VictorN
Better would be fixing the errors...
I see your point. It's just, as you can tell from the above problems I'm encountering ( not been able to determine which version off VS it was build in myself,...) I still have a long way to go and I seriously doubt I have the knowledge and/or skills to start fixing additional errors which come up after converting it. (Unless you offer to help me to fix the errors ;-) )
See, the way I'm looking at it, when the source was created an .exe was succesfully build from it then for the game and as such I should be able to reproduce that process given that I can create the same environment ( version, settings,...) as the developpers did back then.
You may ask why I'm not using the .exe build then. Well, it's for a modification off the game, and before making any changes to the source itself I want to ensure that it builds the .exe properly from the original source without having to think I'm the one who made the errors by changing any lines off code.
Hope that makes sense?
So I tried on VS2003, it no longer asks me to convert trough the conversion wizard. It seems to open properly.
I changed the properties off the projects from Q: to my E: drive (linkers, custom build settings,..)( still cant believe I missed that one at first)
And then when building I get the following:
Code:
------ Skipped Build: Project: CommCore, Configuration: Debug Win32 ------
Project configuration skipped because it is not selected in this solution configuration
------ Build started: Project: gMotor, Configuration: Release Win32 ------
Compiling...
stdafx.cpp
Compiling...
FUclDecompress.cpp
FLzoDecompress.cpp
FG16RealTime.cpp
vWater.cpp
vStaticTerrain.cpp
vShadowManager.cpp
vMeshProcess.cpp
vMesh.cpp
vImpostorCache.cpp
vAnimation.cpp
gpMesh.cpp
gpMediaManager.cpp
csCameraController.cpp
csBodyMover.cpp
akField.cpp
rsVertex.cpp
rsTextureDX.cpp
rsShaderCache.cpp
rsSettings.cpp
rsRenderSystemDX.cpp
Generating Code...
Compiling...
rsRenderSystem.cpp
rsRenderPool.cpp
rsPrimitiveBufferDX.cpp
rsPictureManagerDX.cpp
rsDXErr.cpp
rsDX.cpp
rsDSSParser.cpp
rsDeviceStates.cpp
sndWavPlayer.cpp
sndSoundTrack.cpp
sndSoundSystem.cpp
uiWidgetManager.cpp
uiWidgetEditor.cpp
uiWidget.cpp
uiWeightEdit.cpp
uiTransformTools.cpp
uiTrackEdit.cpp
uiSubtitles.cpp
uiSceneEditor.cpp
uiRenderFarm.cpp
Generating Code...
Compiling...
uiRampEdit.cpp
uiPropEditors.cpp
uiPicture.cpp
uiPhysicsEditor.cpp
uiPalette.cpp
uiObjectInspector.cpp
uiNodeTree.cpp
uiManipulator.cpp
uiEffectEditor.cpp
uiControl.cpp
uiCameraTrack.cpp
sgVSPS.cpp
sgTexture.cpp
sgTerrain.cpp
sgSurfaceCache.cpp
sgStatistics.cpp
sgStateBlock.cpp
sgSpriteManager.cpp
sgSpriteCarcass.cpp
sgSprite.cpp
Generating Code...
Compiling...
sgSkybox.cpp
sgShadow.cpp
sgShader.cpp
sgRoot.cpp
sgReflection.cpp
sgPipeline.cpp
sgParticleSystem.cpp
sgParticleEmitters.cpp
sgParticleClusters.cpp
sgParticleAffectors.cpp
sgNodePool.cpp
sgNode.cpp
sgMovable.cpp
sgModel.cpp
sgLight.cpp
sgLensFlare.cpp
sgHardwareCaps.cpp
sgGU16.cpp
sgGU15.cpp
sgGQuad.cpp
Generating Code...
Compiling...
sgGN16.cpp
sgGlyph.cpp
sgGizmo.cpp
sgGeometry.cpp
sgG2D.cpp
sgG17.cpp
sgFont.cpp
sgFog.cpp
sgEffect.cpp
sgDummy.cpp
sgDeviceSettings.cpp
sgDecal.cpp
sgCursor.cpp
sgController.cpp
sgConstraint.cpp
sgCamera.cpp
sgBillboardGroup.cpp
sgAssetNode.cpp
sgApplication.cpp
sgAnimBlend.cpp
Generating Code...
Compiling...
kXMLParser.cpp
kUuid.cpp
kUtilities.cpp
kTypeTraits.cpp
kThread.cpp
kSystemDialogs.cpp
kStrUtil.cpp
kString.cpp
kStatistics.cpp
kResource.cpp
kResfile.cpp
kPropertyMap.cpp
kPoolAllocator.cpp
kMemorySpy.cpp
kLog.cpp
kIOHelpers.cpp
kIO.cpp
kInput.cpp
kHistory.cpp
kFilePath.cpp
Generating Code...
Compiling...
kFileMapping.cpp
kDirIterator.cpp
kContext.cpp
kColorValue.cpp
kCache.cpp
kBmptool.cpp
kAssert.cpp
mVector.cpp
mUtil.cpp
mTriangle.cpp
mTransform.cpp
mSplines.cpp
mSpatial.cpp
mSkinSSE.cpp
mSkin.cpp
mShapes.cpp
mSegmentSet.cpp
mRandom.cpp
mQuaternion.cpp
mPlane.cpp
Generating Code...
Compiling...
mOctree.cpp
mNoise.cpp
mMonteCarlo.cpp
mMath2D.cpp
mLodder.cpp
mIntersect.cpp
mHeightmap.cpp
mGeom3D.cpp
mFilter.cpp
mAlgo.cpp
sgG18.cpp
Generating Code...
Compiling...
randtable.cpp
huffman.cpp
decompress.cpp
crctable.cpp
compress.cpp
bzlib.cpp
blocksort.cpp
FLZDecoder.cpp
FGANationMMX.cpp
FG18G15.cpp
FCompressor.cpp
kXMLGrammar.cpp
Generating Code...
Compiling...
sgNodeMaker.cpp
Creating library...
Build log was saved at "file://e:\Documents and Settings\Owner\Desktop\C2src\_release\gMotor\BuildLog.htm"
gMotor - 0 error(s), 0 warning(s)
------ Build started: Project: cossacks2, Configuration: Release Win32 ------
Compiling...
stdheader.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
Compiling...
3DGroundModels.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
script_lua_helper.cpp
lua\lua_debugger\script_lua_helper.cpp(2) : fatal error C1083: Cannot open include file: 'lua_define.hpp': No such file or directory
script_file.cpp
lua\lua_debugger\script_file.cpp(2) : fatal error C1083: Cannot open include file: 'lua_define.hpp': No such file or directory
script_debugger_utils.cpp
lua\lua_debugger\script_debugger_utils.cpp(2) : fatal error C1083: Cannot open include file: 'lua_define.hpp': No such file or directory
script_debugger_threads.cpp
lua\lua_debugger\script_debugger_threads.cpp(2) : fatal error C1083: Cannot open include file: 'lua_define.hpp': No such file or directory
script_debugger.cpp
lua\lua_debugger\script_debugger.cpp(2) : fatal error C1083: Cannot open include file: 'lua_define.hpp': No such file or directory
script_callStack.cpp
lua\lua_debugger\script_callStack.cpp(2) : fatal error C1083: Cannot open include file: 'lua_define.hpp': No such file or directory
binde_function.cpp
lua\binde_to_lua\binde_function.cpp(2) : fatal error C1083: Cannot open include file: '../../BE_HEADERS.h': No such file or directory
binde_class.cpp
lua\binde_to_lua\binde_class.cpp(2) : fatal error C1083: Cannot open include file: '../../BE_HEADERS.h': No such file or directory
CUniversalMapClipboard.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
CUniversalMapClipboard.cpp(614) : warning C4533: initialization of 'v2' is skipped by 'goto CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(594) : see declaration of 'v2'
CUniversalMapClipboard.cpp(614) : see declaration of 'CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(614) : warning C4533: initialization of 'v1' is skipped by 'goto CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(594) : see declaration of 'v1'
CUniversalMapClipboard.cpp(614) : see declaration of 'CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(614) : warning C4533: initialization of 'v0' is skipped by 'goto CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(594) : see declaration of 'v0'
CUniversalMapClipboard.cpp(614) : see declaration of 'CUniversalMapClipboard_unInit'
CSun.cpp
CCombineExtension.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
SurfaceOperations.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
SurfaceGenerator.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
Surface.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
Probe.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
Booleans.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
UnitTypeGroup.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
ListUnit.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
FileDialog.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
Generating Code...
e:\documents and settings\owner\desktop\c2src\cossacks2\booleans.cpp(823) : warning C4715: 'CMesh3D::FillNormals' : not all control paths return a value
e:\documents and settings\owner\desktop\c2src\cossacks2\booleans.cpp(2285) : warning C4715: 'CMesh2D2BaseMesh' : not all control paths return a value
e:\documents and settings\owner\desktop\c2src\cossacks2\booleans.cpp(2419) : warning C4715: 'Sections2BaseMesh' : not all control paths return a value
e:\documents and settings\owner\desktop\c2src\cossacks2\booleans.cpp(2473) : warning C4715: 'Vertices2BaseMesh' : not all control paths return a value
e:\documents and settings\owner\desktop\c2src\cossacks2\booleans.cpp(1978) : warning C4715: 'MeshSectionClassify2D' : not all control paths return a value
e:\documents and settings\owner\desktop\c2src\cossacks2\csun.h(26) : warning C4715: 'CSun::AddSource' : not all control paths return a value
at the last line ( with csun.h ) it seems to hang there and not do anything anymore. Not sure why.
-
October 12th, 2011, 09:31 AM
#11
Re: Building exe from existing source
Looks like either you are missing some files or they are not in the right path. Did you try to find these files?
ahoodin
To keep the plot moving, that's why.
-
October 12th, 2011, 10:39 AM
#12
Re: Building exe from existing source
( And should I install an even earlier version? 2003?)
Yes, solution file format version 8.00 means VS.NET2003.
Best regards,
Igor
-
October 12th, 2011, 03:34 PM
#13
Re: Building exe from existing source
Originally Posted by ahoodin
Looks like either you are missing some files or they are not in the right path. Did you try to find these files?
fatal error C1083: Cannot open include file: 'lua_define.hpp': No such file or directory
fatal error C1083: Cannot open include file: '../../BE_HEADERS.h': No such file or directory
I looked up these 2 files to see if they were there. They both are present in the solution explorer. So why do I get this error then?
-
October 12th, 2011, 03:42 PM
#14
Re: Building exe from existing source
They are not being found in your include path. The "Solution Explorer" is not the same as the include path that the compiler uses.
Viggy
-
October 12th, 2011, 04:34 PM
#15
Re: Building exe from existing source
Ok, those 2 above mentionned missing file errors are gone now.
I build again and get following output:
Code:
------ Skipped Build: Project: CommCore, Configuration: Debug Win32 ------
Project configuration skipped because it is not selected in this solution configuration
------ Build started: Project: gMotor, Configuration: Release Win32 ------
gMotor - up-to-date.
------ Build started: Project: cossacks2, Configuration: Release Win32 ------
Compiling...
3DGroundModels.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
script_lua_helper.cpp
script_file.cpp
script_debugger_utils.cpp
script_debugger_threads.cpp
script_debugger.cpp
script_callStack.cpp
binde_function.cpp
binde_class.cpp
CUniversalMapClipboard.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
CUniversalMapClipboard.cpp(614) : warning C4533: initialization of 'v2' is skipped by 'goto CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(594) : see declaration of 'v2'
CUniversalMapClipboard.cpp(614) : see declaration of 'CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(614) : warning C4533: initialization of 'v1' is skipped by 'goto CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(594) : see declaration of 'v1'
CUniversalMapClipboard.cpp(614) : see declaration of 'CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(614) : warning C4533: initialization of 'v0' is skipped by 'goto CUniversalMapClipboard_unInit'
CUniversalMapClipboard.cpp(594) : see declaration of 'v0'
CUniversalMapClipboard.cpp(614) : see declaration of 'CUniversalMapClipboard_unInit'
CSun.cpp
CCombineExtension.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
SurfaceOperations.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
SurfaceGenerator.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
ExMapGenerator.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
TextVisualElements.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
PlaceInAJob.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
mdParser.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
mdParser.cpp(49) : warning C4172: returning address of local variable or temporary
MapDownload.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
LineOfReasoning.cpp
should not include d3dtypes.h when compiling for DX8 or newer interfaces
Generating Code...
This one comes up a lot:
Code:
should not include d3dtypes.h when compiling for DX8 or newer interfaces
What do I do with this one?
Eg. in PlaceInAJob.cpp this appears so the build output says:
Code:
//-----------------------------------------------------------------------------------------------------------------//
#include "stdheader.h"
#include "GameExtension.h"
#include "PlaceInAJob.h"
//-----------------------------------------------------------------------------------------------------------------//
extern int AnimTime;
void TakeResLink(OneObject* OBJ);
void TakeResources(UnitsGroup* UGR,byte Type,byte NI,byte ResType,GAMEOBJ* Zone);
void UGR_TakeResourcesLink(UnitsGroup* UGR);
void SetScreenCenterToXY(int x, int y);
//-----------------------------------------------------------------------------------------------------------------//
void PlaceInAJob::OnGameStart()
{
LastProcessTime=4*25*256;
}
void PlaceInAJob::ProcessingGame()
{
const byte NRes=6;
if(GSets.PeasantAutoWork&&(LastProcessTime+4*25*256)<AnimTime)
{
for(byte i=0;i<8;i++)
{
if(GSets.CGame.isHumanPlayer(i))
{
word* id=NatList[i];
int n=NtNUnits[i];
int NotWork=0;
int InWork=0;
int InRes[NRes];
memset(InRes,0,sizeof InRes);
int Cx=0;
int Cy=0;
for(int j=0;j<n;j++)
{
OneObject* OB=Group[id[j]];
if(OB)
{
NewMonster* NM=OB->newMons;
if(NM->Peasant)
{
if(OB->StandTime>200&&!OB->LocalOrder)
{
NotWork++;
}
else
{
Order1* Ord=OB->LocalOrder;
while(Ord)
{
if(Ord->DoLink==&TakeResLink)
{
byte ResType=Ord->info.TakeRes.ResID;
if(ResType<NRes)
{
InRes[ResType]++;
InWork++;
Cx+=OB->RealX/16;
Cy+=OB->RealY/16;
break;
}
}
Ord=Ord->NextOrder;
}
}
}
}
}
if(NotWork&&InWork)
{
Cx/=InWork;
Cy/=InWork;
static UnitsGroup UG[NRes];
for(byte k=0;k<NRes;k++)
{
UG[k].Clear();
InRes[k]=(InRes[k]*NotWork*100)/InWork;
}
int lastres=-1;
for(int j=0;j<n;j++)
{
OneObject* OB=Group[id[j]];
if(OB)
{
NewMonster* NM=OB->newMons;
if(NM->Peasant&&OB->StandTime>200&&(!OB->LocalOrder)&&Norma(OB->RealX/16-Cx,OB->RealY/16-Cy)<2000)
{
bool st=false;
for(byte f=0;f<NRes;f++)
{
if(InRes[f]>0)
{
UG[f].AddNewUnit(OB);
InRes[f]-=100;
lastres=f;
st=true;
}
}
if(!st&&lastres!=-1)
UG[lastres].AddNewUnit(OB);
}
}
}
for(byte r=0;r<NRes;r++)
{
TakeResources(&UG[r],0,i,r,NULL);
UGR_TakeResourcesLink(&UG[r]);
}
}
}
}
LastProcessTime=AnimTime;
}
}
void PlaceInAJob::OnInitAfterMapLoading()
{
int CurNat=GSets.CGame.cgi_NatRefTBL[MyNation];
word* id=NatList[CurNat];
int n=NtNUnits[CurNat];
int cx=0;
int cy=0;
int nc=0;
int cpx=0;
int cpy=0;
int ncp=0;
for(int j=0;j<n;j++)
{
OneObject* OB=Group[id[j]];
if(OB)
{
NewMonster* NM=OB->newMons;
if(NM->Peasant)
{
cpx+=OB->RealX/16;
cpy+=OB->RealY/16;
ncp++;
}
cx+=OB->RealX/16;
cy+=OB->RealY/16;
nc++;
}
}
if(ncp)
{
SetScreenCenterToXY(cpx/ncp,cpy/ncp);
//CITY[CurNat].CenterX=cpx/ncp;
//CITY[CurNat].CenterY=cpy/ncp;
}
else
if(nc)
{
SetScreenCenterToXY(cx/nc,cy/nc);
//CITY[CurNat].CenterX=cx/nc;
//CITY[CurNat].CenterY=cy/nc;
}
}
//-----------------------------------------------------------------------------------------------------------------//
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Click Here to Expand Forum to Full Width
|