Linear equation/interpolation - basic compile errors

[controlsguy]

I am trying to create C++ code that allows a linear equation (interpolator?) to take in a value and produce an output based on a table that is specified.

The problem I am having is the GE compiler uses libraries not available in Visual studio and visa versa…
Screen shot of error…” error: expected ‘=’ ‘,’’;’’asm’…ect.

This is the code I am working with. Just set up a flat XY trying to link inputs and outputs to X0 – Xn and Y0 – Yn.
// Lin_Interp.c : Defines the entry point for the console application.
//
#include "PACRXPlc.h" /* Include file applicable for all targets */
#include "string.h"
#include "math.h"
#include "stdlib.h"
#include <time.h>
#include <ctype.h>
#include <stdio.h>
/* Constants / #defines */
T_INT16 *X, T_INT16 *X0, T_INT16 *X1, T_INT16 *X2, T_INT16 *Y0, T_INT16 *Y1, T_INT16 *Y2, T_INT16 *Z1)
int Gefmain =(){
label1:
int i=0,j=0,X0=0,Y0=0,X1=0,Y1=0;
double X,Y,Fxy=0,Fxy0=0,FxyOld=0,Fxy1=0;
// "Lin Interp Y OPERATING LIMIT FUNCTION - CORRECTED Y ARRAY" TY
double TY[11]={0,10,20,30,40,50,60,70,80,90,100,};
// "Lin Interp X OPERATING LIMIT FUNCTION – CORRECTED X ARRAY" TX
double TX[11]={0,10,20,30,40,50,60,70,80,90,100};
// "LIN Interp OPERATING LIMIT FUNCTION - XY LIMIT ARRAY" XYlim
double XYlim[11][11]={0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0};
// Print-Out on console "XY LIMIT ARRAY" XYlim
for (j=0;j<12;j++){
for (i=0;i<10;i++){
cout<< XYlim[i][j] << " "; //Display the curve
}
cout << endl;
}
// Input X, ensure it is in the range.
cout<<endl<< "Please enter X value:";
cin>>X;
while (X >100.0 || X<0.0){
cout<<endl<< "Your X value is either greater than 100.0 or smaller than 0.0, Please re-enter again:";
cin>>X;
}
// Input Y, ensure it is in the range.
cout<<endl<< "Please enter Y value:";
cin>>Y;
while (Y >100.0 || Y<0.0){
cout<<endl<< "Your Y value is either greater than 100 or smaller than 0, Please re-enter again:";
cin>>Y;
}
cout<<endl<< " X="<<X<< ". Y="<<Y<<endl<<endl;

//Select the correct X0&Y0, X1&Y1
for (i=0;i<10;i++){
if (X >= TX[i]) X0=i;
else break;
}
X1=X0+1;

for (j=0;j<12;j++){
if (Y >= SPD[j]) Y0=j;
else break;
}
Y1=Y0+1;

cout<< " X0="<<X0<< ". X1="<<X1<<" i="<<i<<endl;
cout<< " Y0="<<Y0<< ". Y1="<<Y1<<" j="<<j<<endl<<endl;

cout<< " KGV_X0["<<X0<<"]="<<TX[X0]<< " KGV_X1["<<X1<<"]="<<TX[X1]<<endl;
cout<< " SPD_Y0["<<Y0<<"]="<<TY[Y0]<<" SPD_Y1["<<Y1<<"]="<<TY[Y1]<<endl<<endl;

cout<< " XYlim["<<X0<<"]["<<Y0<<"]="<<XYlim[X0][Y0]<<endl;
cout<< " XYlim["<<X1<<"]["<<Y0<<"]="<<XYlim[X1][Y0]<<endl;
cout<< " XYlim["<<X0<<"]["<<Y1<<"]="<<XYlim[X0][Y1]<<endl;
cout<< " XYlim["<<X1<<"]["<<Y1<<"]="<<XYlim[X1][Y1]<<endl<<endl;
//calculate F(X,Y), and print-out on console.
//Using one equation to calculate F(X,Y). The problem with this one equation method is if X0 = X1, then most of the equation's products go to zero.
//To see this problem, enter an known X value like 48. Then enter a Y value that is not known or on the curve. Example would be X=48 and Y=92.5
//The 3-equation result will be the correct value of 9.1815, the single equation result will be the result of X=48 and Y=90 or 8.672
FxyOld=XYlim[X0][Y0]+((X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y0]-XYlim[X0][Y0]))+
((Y-TY[Y0])/(TY[Y1]-TY[Y0])*(X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y1]-XYlim[X0][Y1]-XYlim[X1][Y0]+XYlim[X0][Y0]));
//Using 3 equations to calculate F(X,Y). Using this method prevents the problem that occurs when X0 = X1 and Y0 does not equal Y1.
Fxy0=XYlim[X0][Y0]+((X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y0]-XYlim[X0][Y0]));
Fxy1=XYlim[X0][Y1]+((X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y1]-XYlim[X0][Y1]));
Fxy=Fxy0+((Y-TY[Y0])/(TY[Y1]-TY[Y0])*(Fxy1-Fxy0));

cout<< " Fxy["<<X<<"]["<<Y<<"]= "<<Fxy<<" (3-equation result)"<<endl<<endl;//Three equation result to screen
cout<< " FxyOld["<<X<<"]["<<Y<<"]= "<<FxyOld<<" (1-equation result)"<<endl<<endl; //Single equation result to screen
goto label1; //Start program over
return 0;
{

[S_M_A]

Frankly, this isn't readable. Fix the post by adding code tags and indentation. See http://forums.codeguru.com/misc.php?do=bbcode

[GCDEF]

No Visual C++ question

No code tags

Not even an indication of which line generates the error. You won't get any help like that.

[Paul McKenzie]

I am trying to create C++ code that allows a linear equation (interpolator?) to take in a value and produce an output based on a table that is specified.

The problem I am having is the GE compiler uses libraries not available in Visual studio and visa versa…
Screen shot of error…” error: expected ‘=’ ‘,’’;’’asm’…ect.

1) Use code tags when posting code. Your code is practically unreadable.

2)

double XYlim[11][11];
//...
for (j=0;j<12;j++)  { 
    for (i=0;i<10;i++)  {
cout<< XYlim[i][j] << " "; //Display the curve
  }
}

What happens when j == 11? You are then accessing the array with an out-of-bounds index.

3)

   goto label1;  //Start program over

Get rid of this, and use proper looping constructs (while, do-while, etc.)

Regards,

Paul McKenzie

[controlsguy]

Truly sorry about that guys. See below. Thank you for your help.

// Lin_Interp.c : Defines the entry point for the console application.
//
#include "PACRXPlc.h"  /* Include file applicable for all targets */
#include "string.h"
#include "math.h"
#include "stdlib.h"
#include <time.h>
#include <ctype.h>
#include <stdio.h>
/* Constants / #defines  */
T_INT16 *X, T_INT16 *X0, T_INT16 *X1, T_INT16 *X2, T_INT16 *Y0, T_INT16 *Y1, T_INT16 *Y2, T_INT16 *Z1)
int Gefmain =(){
       label1:
    int i=0,j=0,X0=0,Y0=0,X1=0,Y1=0;
      double X,Y,Fxy=0,Fxy0=0,FxyOld=0,Fxy1=0;
// "Lin Interp Y OPERATING LIMIT FUNCTION - CORRECTED Y ARRAY"  TY
      double TY[11]={0,10,20,30,40,50,60,70,80,90,100,};
// "Lin Interp X OPERATING LIMIT FUNCTION – CORRECTED X ARRAY"  TX
      double TX[11]={0,10,20,30,40,50,60,70,80,90,100};
      // "LIN Interp OPERATING LIMIT FUNCTION - XY LIMIT ARRAY"  XYlim
    double XYlim[11][11]={0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0,
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0
0.0,10.0,20.0,30.0,40.0,50.0,60.0,70.0,80.0,90.0,100.0};
// Print-Out on console "XY LIMIT ARRAY"  XYlim
      for (j=0;j<12;j++){             
        for (i=0;i<10;i++){
         cout<< XYlim[i][j] << " "; //Display the curve
            }
      cout << endl;
      }
      // Input X, ensure it is in the range.
      cout<<endl<< "Please enter X value:";
      cin>>X;     
      while (X >100.0 || X<0.0){
                  cout<<endl<< "Your X value is either greater than 100.0 or smaller than 0.0, Please re-enter again:";
            cin>>X;
            }
      // Input Y, ensure it is in the range.
    cout<<endl<< "Please enter Y value:";
      cin>>Y;
      while (Y >100.0 || Y<0.0){
                  cout<<endl<< "Your Y value is either greater than 100 or smaller than 0, Please re-enter again:";
            cin>>Y;
            }     
      cout<<endl<< "    X="<<X<< ".    Y="<<Y<<endl<<endl;

      //Select the correct X0&Y0, X1&Y1
          for (i=0;i<10;i++){ 
            if (X >= TX[i]) X0=i;
            else break;
      }
      X1=X0+1;

    for (j=0;j<12;j++){ 
            if (Y >= SPD[j]) Y0=j;
            else break;
      }
      Y1=Y0+1;

      cout<< "    X0="<<X0<< ".    X1="<<X1<<"   i="<<i<<endl;
    cout<< "    Y0="<<Y0<< ".    Y1="<<Y1<<"   j="<<j<<endl<<endl;

      cout<< "    KGV_X0["<<X0<<"]="<<TX[X0]<< "    KGV_X1["<<X1<<"]="<<TX[X1]<<endl;   
      cout<< "    SPD_Y0["<<Y0<<"]="<<TY[Y0]<<"    SPD_Y1["<<Y1<<"]="<<TY[Y1]<<endl<<endl;

      cout<< "    XYlim["<<X0<<"]["<<Y0<<"]="<<XYlim[X0][Y0]<<endl;
      cout<< "    XYlim["<<X1<<"]["<<Y0<<"]="<<XYlim[X1][Y0]<<endl;
      cout<< "    XYlim["<<X0<<"]["<<Y1<<"]="<<XYlim[X0][Y1]<<endl;
      cout<< "    XYlim["<<X1<<"]["<<Y1<<"]="<<XYlim[X1][Y1]<<endl<<endl;
      //calculate F(X,Y), and print-out on console.
    //Using one equation to calculate F(X,Y).  The problem with this one equation method is if X0 = X1, then most of the equation's products go to zero.
      //To see this problem, enter an known X value like 48.  Then enter a Y value that is not known or on the curve.  Example would be X=48 and Y=92.5
      //The 3-equation result will be the correct value of 9.1815, the single equation result will be the result of X=48 and Y=90 or 8.672
    FxyOld=XYlim[X0][Y0]+((X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y0]-XYlim[X0][Y0]))+
            ((Y-TY[Y0])/(TY[Y1]-TY[Y0])*(X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y1]-XYlim[X0][Y1]-XYlim[X1][Y0]+XYlim[X0][Y0]));
   //Using 3 equations to calculate F(X,Y).  Using this method prevents the problem that occurs when X0 = X1 and Y0 does not equal Y1.
   Fxy0=XYlim[X0][Y0]+((X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y0]-XYlim[X0][Y0]));
   Fxy1=XYlim[X0][Y1]+((X-TX[X0])/(TX[X1]-TX[X0])*(XYlim[X1][Y1]-XYlim[X0][Y1]));
   Fxy=Fxy0+((Y-TY[Y0])/(TY[Y1]-TY[Y0])*(Fxy1-Fxy0));

   cout<< "    Fxy["<<X<<"]["<<Y<<"]= "<<Fxy<<"   (3-equation result)"<<endl<<endl;//Three equation result to screen
   cout<< "    FxyOld["<<X<<"]["<<Y<<"]= "<<FxyOld<<"   (1-equation result)"<<endl<<endl;    //Single equation result to screen
   goto label1;  //Start program over
      return 0;
        {

[GCDEF]

Is showing the line that causes the error really too much to ask? Without PACRXPlc.h we can't compile it an reproduce your issue.

[Paul McKenzie]

return 0;
{

Why are you using an opening brace here?

#include "PACRXPlc.h"  /* Include file applicable for all targets */

What is this header?

int Gefmain =(){

Explain what that line above does. I've never seen anything like it in C++.

T_INT16 *X, T_INT16 *X0, T_INT16 *X1, T_INT16 *X2, T_INT16 *Y0, T_INT16 *Y1, T_INT16 *Y2, T_INT16 *Z1)

This is completely wrong.

Assuming that T_INT16 is a type, then you must use semicolons between the declarations if you're going to declare the variables that way:

T_INT16 *X;
T_INT16 *X0; 
T_INT16 *X1; 
T_INT16 *X2; 
T_INT16 *Y0; 
T_INT16 *Y1;
T_INT16 *Y2; 
T_INT16 *Z1;

Also, remember that your code has runtime and logic errors, as I stated previously. So even if you get your program to compile, you have to address those issues.

Regards,

Paul McKenzie