exiting the form

[aamir55]

i have a single form, if i just click on it then it should close
how it can be done??

[aamir55]

i want to show a form as long as work is done
if i show that form in the start of a work and then it should close after when work is done.
for example if i have a function like this

LoadTree()


End Sub

when this function is started executing then this form should display and when this work is performed on the end of procedure then that form should close.
thanks.

[DataMiser]

use

 me.close

to unload the form

[FrankZA]

If you want the window to close when you click on it create a subroutine such as this:

	Sub FormCloser(sender As Object, e As EventArgs) Handles Me.Click
		me.Close
	End Sub

[Cimperiali]

If you want an example on how a routine could put out a from to tell user to wait (or to show a progressbar) while a job is in progress and close it bycode when the job is ended, here is a small example (you can do it in different ways, and you have to adapt it to your code: in this example I put a main module as startup of app, and show a form from there)
I have done it with Net 2008, but there is nothing of 3.5 in it , so it should work also with earlier versions , but you might have to grab the code from modules and recreate the solution and the project)

[aamir55]

if i use a progress bar on my form1 and then use this method in buttons click event then progress bar should start and when this methos did all work then this progress bar should stop.
progress bar should displayed as long photos are being loaded and after successfull loading progress bar should stop.
the load tree method is as follow

 Private Sub LoadTree()
        Try
           
            ' Start with clear tree
            treeAlbum.Nodes.Clear()
            ' If the connection is closed, open it.
            If SqlConn.State = ConnectionState.Closed Then
                SqlConn.Open()
            End If
            ' Just to be sure make sure it was opened
            If SqlConn.State = ConnectionState.Open Then
                ' Create the stored proc command to retrieve the records
                Using sqlCmd As New SqlCommand("sp_GetPhotoAlbums", SqlConn)
                    sqlCmd.CommandType = CommandType.StoredProcedure
                    ' Now execute the command
                    Using sqlPhotoAlbum As SqlDataReader = sqlCmd.ExecuteReader()
                        Dim nAlbumID As Integer = 0
                        ' Keep track of the current album
                        Dim nAlbumIndex As Integer = -1
                        ' Keep track of the tree index
                        ' Keep reading all the records returned
                        Dim imgList As New ImageList()
                        'Add image to represent an Album from resources

                        Dim albumImg As Image = My.Resources.IMG
                        imgList.Images.Add("Album", albumImg)
                        imgList.ColorDepth = ColorDepth.Depth32Bit
                        While (sqlPhotoAlbum.Read())
                            'Populate all images
                            Dim data As Byte() = CType(sqlPhotoAlbum("photo"), Byte())
                            Dim ms As New System.IO.MemoryStream(data, 0, data.Length)
                            Dim photo As Image = Image.FromStream(ms) ''
                            imgList.Images.Add(sqlPhotoAlbum("Photo").ToString(), photo)
                            treeAlbum.ImageList = imgList
                            ' Check if a new album needs to be added to the tree
                            InsertAlbum(sqlPhotoAlbum("Album").ToString(), sqlPhotoAlbum("Photo").ToString(), CInt(sqlPhotoAlbum("AlbumID")), sqlPhotoAlbum("Album_Desc").ToString(), sqlPhotoAlbum("PhotoID").ToString())
                        End While
                        sqlPhotoAlbum.Close()

                    End Using
                End Using
                If (SqlConn.State = ConnectionState.Closed) Then
                    SqlConn.Open()
                End If
                Using sqlCmd2 As New SqlCommand("sp_GetPhotoAlbums", SqlConn)
                    Using sqlMatchPhoto As SqlDataReader = sqlCmd2.ExecuteReader()
                        While (sqlMatchPhoto.Read())
                            Dim node As TreeNode
                            For Each node In treeAlbum.Nodes
                                If (node.Name = sqlMatchPhoto("Album").ToString()) Then
                                    Dim i As Integer
                                    Dim childNode As TreeNode

                                    For Each childNode In node.Nodes
                                        If childNode.Name = sqlMatchPhoto("Photo").ToString() Then
                                            For i = 0 To treeAlbum.ImageList.Images.Count - 1
                                                If treeAlbum.ImageList.Images.Keys(i) = sqlMatchPhoto("Photo").ToString() Then
                                                    childNode.ImageIndex = i
                                                    Exit For
                                                End If
                                            Next
                                            Exit For
                                        End If
                                    Next
                                End If
                            Next
                        End While
                        sqlMatchPhoto.Close()
                        
                    End Using
                End Using
            End If
        Catch e As SqlException
            'MessageBox.Show(e.Message)
        End Try
    End Sub

and this is called in click event as follow

LoadTree()

[Cimperiali]

you have two main cycles:

 While (sqlPhotoAlbum.Read())
       'Populate all images
       Dim data As Byte() = CType(sqlPhotoAlbum("photo"), Byte())
       Dim ms As New System.IO.MemoryStream(data, 0, data.Length)
       Dim photo As Image = Image.FromStream(ms) ''
       imgList.Images.Add(sqlPhotoAlbum("Photo").ToString(), photo)
       treeAlbum.ImageList = imgList
       ' Check if a new album needs to be added to the tree
       InsertAlbum(sqlPhotoAlbum("Album").ToString(), sqlPhotoAlbum("Photo").ToString(), CInt(sqlPhotoAlbum("AlbumID")), sqlPhotoAlbum("Album_Desc").ToString(), sqlPhotoAlbum("PhotoID").ToString())
End While

To keep track of this one while going on (=if you want to show a progress of this
partial operation) , you should know how many you have before. but as it is a
SqlDataReader, it is a reader forward only, thus it cannot tell you how many record it has.
One solution is to make a query to get the recordcount,
first, then use that value to divide a counter inside the reading cycle like in:

'inside your cycle
counter= counter+1
progressbar.value= counter*100/recordcount

the second main Cylce has some nested cycles:

While (sqlMatchPhoto.Read())
   Dim node As TreeNode
   For Each node In treeAlbum.Nodes
      If (node.Name = sqlMatchPhoto("Album").ToString()) Then
         Dim i As Integer
         Dim childNode As TreeNode

         For Each childNode In node.Nodes
            If childNode.Name = sqlMatchPhoto("Photo").ToString() Then
               For i = 0 To treeAlbum.ImageList.Images.Count - 1
                  If treeAlbum.ImageList.Images.Keys(i) = sqlMatchPhoto("Photo").ToString() Then
                     childNode.ImageIndex = i
                     Exit For
                  End If
               Next
               Exit For
            End If
         Next
      End If
   Next
End While

at end is like the firsty: you do operation for each record you find in a sqlDataReader
You could consider using same strategy as above. ou could correct the value of progressbar
to count corrected loaded item and discarding not loaded one from both the counter and the
recodcount, but I do belive it would not add any good to a simpler
"recordProcessed *100 / recordcount" formula....