Output to txt document

[infringer]

NOTE THIS QUESTION NO LONGER APPLYS PLEASE READ POST #15 but

I will keep this here because the answer is given for this and it may be useful to someone else


Need a bit of help I want to work on my second project but don't know where to start exactly...

What I want it to do is grab all the files in a specified directory then output all of the names of the files on to a text document.

But I want three lines of text and it needs to go in a key spot.

xxxxxxxxxxxxxxxxxxxxxxxxxxxx (NAME OF FILE) xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
(NAME OF FILE) xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(NAME OF FILE)

I would like for every file in the folder to basically get put where it says name of file for each instance. So for each instance it spits out all of the same text except for the name of the file is changed to match the complete file name.

Thanks a million guys for any help in advance.

[DataMiser]

I would use a for each loop to get all the filenames, append/prepend characters as needed, use writeline to write the data to the output file.

[BioPhysEngr]

You'll also find it helpful to make use of the DirectoryInfo and FileInfo classes. Take note of DirectoryInfo.GetFiles(), specifically.

Clear enough? Shouldn't be too difficult...

Good luck!

[infringer]

Post edited direction shift in app

[infringer]

REMOVED differnt direction for post

[infringer]

REMOVED different direction for app

[infringer]

refer to post #15

[DataMiser]

GetFiles(.iso) would result in an error. You also need to use a wildcard to list all files of a given type

e.g.

GetFiles("*.iso")

To get all the files use something like you have above but rather than getdirectories use getfiles in your for each loop.

Not sure what you are talking about with the replace. Sounded like you wanted to create a text file that lists all the filenames in a given folder, to do this you would create a new file and write the names to it as you go. Of course you could store them all in a var that you keep appending to until all have been read then write all the data at once.

As for programing being easy, Well it has gotten a lot easier over the years with more and more canned routines and classes as well as tons of samples on the net. Still many would find it difficult and most who would think it easy haven't gotten very far yet.


btw the streamwriter which you might use to write to the file allows a parameter for what to do if a file already exists, Append or overwrite are your options. In your case you would simply want to choose to overwrite.

[infringer]

Removed improper code different direction for app

[BioPhysEngr]

By the way, infringer, you can make your code look nicer by surrounding it with [code] and [/code] tags to get something that preserves formatting like:

static void Main(string[] args)
{
    // Get the directories currently on the C drive.
    DirectoryInfo[] cDirs = new DirectoryInfo(@"c:\").GetDirectories();

    // Write each directory name to a file.
    using (StreamWriter sw = new StreamWriter("CDriveDirs.txt"))
    {
        foreach (DirectoryInfo dir in cDirs)
        {
            sw.WriteLine(dir.Name);
        }
    }

    // Read and show each line from the file.
    string line = "";
    using (StreamReader sr = new StreamReader("CDriveDirs.txt"))
    {
        while ((line = sr.ReadLine()) != null)
        {
            Console.WriteLine(line);
        }
    }
}

[infringer]

This post was edited because change of direction

[BioPhysEngr]

Hrmmm there is a couple of spots I am not so sure of like if the array will be strings which I can retrieve with my for each statement... Must keep researching this is too awesome should not take that long and I should be on my way to start throwing some code into VS.

Okay; looks like you're on the right track. Good work. Let us know if you have any problems.

[infringer]

Refer to POST #15 as start of thread

[BioPhysEngr]

Hrm? I guess I am confused about what is confusing you. This is the solution I would have used:

public static void Main(string[] args)
{
    //Write all files of type *.iso in somefolder to output.txt
    writeFileNames(@"C:\SomeFolder", "output.txt", "*.iso");
}


public static void writeFileNames(string directoryPath, string outputTextPath, string fileTypeMask)
{
    //Open a writer 
    StreamWriter writer = new StreamWriter(outputTextPath);
    
    DirectoryInfo dirInfo = new DirectoryInfo(directoryPath);
    FileInfo[] files = dirInfo.GetFiles(fileTypeMask);
    
    //Iterate through the files
    foreach(FileInfo file in files)
    {
        writer.WriteLine("Line one with file name " + file.Name + " some other text");
        writer.WriteLine("Line two with file name and full path " + file.FullName + " some other text");
    }
    
    //We're done writing output for now
    writer.Close();
    write.Dispose();
    
    //Do you want to inclue subdirectories?  If so, recursively call this subroutine on them
    DirectoryInfo[] subdirs = dirInfo.GetDirectories();
    foreach(DirectoryInfo subdir in subdirs)
    {
        //Recursive call to this method: note it's important we closed the writer before this call
        writeFileNames(subdir.FullPath, outputTextPath, fileTypMask);
    }    
}

Does that help? Did I miss your question?

Note that the recursive call to subdirectories has a risk of encountering a directory you don't have security access to, throwing a SecurityException when it encounters dirInfo.GetFiles(...). You can catch this by wrapping this call wit a try-catch block, but that is probably too much detail for now.

Hopefully this wasn't homework. Sometimes it's just easiest to explain by example though. If it WAS homework, don't study the solution too closely: try to derive it yourself - it's more educational that way.

[infringer]

No sir it is not homework at all to tell you the truth I am trying to donate some time to help improve a great free program and the intentions are 100% good ...

The maker of a good syslinux tool called SARDU.

The problem it appears without looking into it is a bit more complex...

I kinda kicked some ideas around that would make the program better but the developer seems to be overwhelmed and needed help so I set out to help him out with a very limited knowledge of programming...

The idea is to learn from example in this situation once I understand a method for completion of a task I can use that method and expand on it and from it there is a lot of little parts and pieces that are not fully understood...

Here is a cut and paste from what I figured out and how to support this it will be a bit different then what I had figured cause the autogeneration will not work the way I had visioned it due to the fact there is different options that much be used for each ISO.

CUT AND PASTE STARTS NOW::::::::::::::::::::::::::::::::::::::::::::::::

Re: New features Req: Lets Make this a great application

Postby infringer » Today, 7:48 am
Objectives:

- Create a skeleton file with all config info on it skeleton.txt
- Get all file names of the iso file type in the current directory store them in a text file currentiso.txt
- Create a text file with iso's that are supported in this thread viewtopic.php?f=2&t=252 supportediso.txt
- Create a seperate config texts for each supported iso Example ubuntu10.1.iso.txt
- If there is a match then add the text from the corresponding ISO.txt to the skeleton.txt and keep adding all matches till finished
- Save skeleton.txt as extra.cfg
- Then Exit Gracefully with everything automated

Now if coding were as easy as english I would be done! lol!

If anyone has any suggestions to make this easier go right ahead....

I wonder if I could make 3 arrays lets say currentiso and supportediso and equaliso

Then I could check each supportediso array each string keeping it static and compare with currentiso array if they are equal I could add them to equal iso array.
Once equaliso array is built then I could load each string from equal iso + iso.txt and add the information from this file to skeleton.txt then save it.

It may be easier to use mysql or MS SQL to do this???

I need some suggestions here on the easiest way to accomplish what I would like to do here or what is possible in C#

Please do help me get started down some preferred path and give me some good reasons why to follow that path.

Thanks -infringer-

STATUS OF SARDUX objectives now started


Now as for an example of the supported ISO's so you can see the differences in the way the text has to be added to the extra.cfg

extra.cfg included below some notes about extra.cfg first
"#" comments a line of text out
all extras added must be included between two lines in the text

#-> EDIT HERE <-
This is where we add the data
#-> EDIT HERE <-
START OF extra.cfg

#	Don't change or delete the following lines
#File creato da Shardana Antivirus Rescue Disk Utility 'SARDU'
default vesamenu.c32
prompt 0
menu title     Shardana Antivirus Rescue Disk Utility
MENU SEPARATOR
menu background sardu.jpg
MENU TABMSG  http://www.sarducd.it
menu color hotsel 30;47      #40000000 #20ffffff
menu color sel 30;47      #40000000 #20ffffff
menu color scrollbar 30;47      #40000000 #20ffffff
menu color help		37;40      #c0ffffff #00000000 std
MENU WIDTH 74
MENU MARGIN 15
#MENU PASSWORDMARGIN 3
MENU ROWS 15
MENU TABMSGROW -10
MENU CMDLINEROW 23
MENU ENDROW -1
#MENU PASSWORDROW 11
MENU TIMEOUTROW -8
#
LABEL -
MENU LABEL Extra:
MENU DISABLE
#	Don't change or delete the above lines
#examples here: http://members.chello.at/bobby100/ILpart1.htm
#-----> ENTER YOUR CODE AFTER THIS LINE    don't leave blank lines <-------
#
#-> EDIT HERE <-
#-> EDIT HERE <-
#
#	Don't change or delete the following lines
#
#boot torna indietro
label <==Back
kernel vesamenu.c32
    APPEND /syslinux.cfg
#
#	Don't change or delete the above lines

Now as for the supported ISO's I will include the list of them to show you why I will have to automate in a manner following some of the objectives that I have changed I still do not know if I have the best way to automate that is why I need the help of GURU's like yourself and a very limited knowledge of C# does not help as well.

I will have to specify that names of ISO's need to be renamed to match a particular ISO so that people do not use things like ubuntu_laptop_For_George.iso so people will have to change the name I would guess that one could automate this process as well with MD5 checks but when you get into slightly modified ISO's MD5 hashes will not work even though the ISO is basically the same and should work. So I guess another way to automate the rename would be to scan the name of the ISO for key numbers or letters like a version number 10.1 and a bit based 64bit or 32bit or x86 and x64 along with the base name such as
ubuntu then that way if someone renamed the ISO to Ubuntu_10.1_Netbook_Edition_Georgex_x86.iso it could be changed to a name that fits the descriptor needed. But I think it is best that we give people responsibility of naming ISO's properly to match the supported listing because someone could have a good ISO lets say and abbreviate it as well UNE10.1x64.iso meaning ubuntu_netbook_edition_10.1_x64.iso so the problem could get very ugly and not manageable.

List of supported ISO's information STARTS HERE:::::

title Ubuntu 10.10 (GNOME Desktop x86)
find --set-root /ubuntu-10.10-desktop-i386.iso
map /ubuntu-10.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.10-desktop-i386.iso splash
initrd /casper/initrd.lz

title Xubuntu 10.10 (XFCE Desktop x86)
find --set-root /xubuntu-10.10-desktop-i386.iso
map /xubuntu-10.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-10.10-desktop-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Kubuntu 10.10 (KDE Desktop x86)
find --set-root /kubuntu-10.10-desktop-i386.iso
map /kubuntu-10.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.10-desktop-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Kubuntu 10.10 (KDE Desktop x86)
find --set-root /kubuntu-10.10-desktop-i386.iso
map /kubuntu-10.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.10-desktop-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

# Suggested by Ambriel
title Lubuntu 10.10 (LXDE Lightweight Desktop x86)
find --set-root /lubuntu-10.10.iso
map /lubuntu-10.10.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper persistent iso-scan/filename=/lubuntu-10.10.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Ubuntu 10.10 Netbook Remix (NetBook Distro)
find --set-root /ubuntu-10.10-netbook-i386.iso
map /ubuntu-10.10-netbook-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz floppy.allowed_drive_mask=0 noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu-netbook.seed boot=casper persistent iso-scan/filename=/ubuntu-10.10-netbook-i386.iso splash
initrd /casper/initrd.lz

title Memtest86+
find --set-root /mt410.iso
map --mem /mt410.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)

title Debian Live
find --set-root /debian/live/initrd.img
kernel /debian/live/vmlinuz boot=live union=aufs noswap live-media-path=/debian/live
initrd /debian/live/initrd.img

title Sugar on a Stick
find --set-root /sos/isolinux/vmlinuz0
kernel /sos/isolinux/vmlinuz0 root=live:LABEL=MULTIBOOT live_dir=sos/LiveOS rootfstype=vfat ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD
initrd /sos/isolinux/initrd0.img

# Suggested by Relst
title Run a Linux OS from the Internet
kernel /gpxe.lkrn

title Balder DOS image (FreeDOS)
find --set-root /balder10.img
map --unsafe-boot /balder10.img (fd0)
map --hook
chainloader --force (fd0)+1
rootnoverify (fd0)

# Suggested by Martin Andersson
title DBAN 2.2.6 (Drive Nuker)
find --set-root /dban-2.2.6_i586.iso
map --mem /dban-2.2.6_i586.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)

# Suggested by Greg Steer
title Offline NT Password & Registy Editor
find --set-root /cd100627.iso
map /cd100627.iso (hd32)
map --hook
chainloader (hd32)

# Start Suggested by Erhan Sohail
title TinyCore
find --set-root /tinycore-current.iso
map /tinycore-current.iso (0xff) || map --mem /tinycore-current.iso (0xff)
map --hook
chainloader (0xff)

title SliTaz 3.0
find --set-root /slitaz-3.0.iso
map --heads=0 --sectors-per-track=0 /slitaz-3.0.iso (hd32)
map --hook
chainloader (hd32)

title Puppy 511
find --set-root /puppy/lupu-511.sfs
kernel /puppy/vmlinuz
initrd /puppy/initrd.gz

title DSL 4.4.10
find --set-root /dsl-4.4.10-initrd.iso
map /dsl-4.4.10-initrd.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)

title Riplinux
find --set-root /RIPLinuX.iso
map --heads=0 --sectors-per-track=0 /RIPLinuX.iso (0xff) || map --heads=0 --sectors-per-track=0 --mem /RIPLinuX.iso (0xff)
map --hook
chainloader (0xff)

title Ultimate Boot CD
find --set-root /ubcd.iso
map /ubcd.iso (hd32)
map --hook
chainloader (hd32)

title OphCrack XP 2.3.1 (XP Password Cracker)
find --set-root /ophcrack-xp-livecd-2.3.1.iso
map /ophcrack-xp-livecd-2.3.1.iso (0xff)
map --hook
root (0xff)
kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin
initrd /boot/rootfs.gz

# Suggested by Sunny
title YlmF (Windows Like OS)
find --set-root /YlmF_OS_3.0.iso
map /YlmF_OS_3.0.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/YlmF_OS_3.0.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.img

title Ubuntu Rescue Remix 10.04 (Recovery Tools)
find --set-root /ubuntu-rescue-remix-10-04.iso
map /ubuntu-rescue-remix-10-04.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper iso-scan/filename=/ubuntu-rescue-remix-10-04.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Ubuntu 10.10 (GNOME Desktop x86)
find --set-root /ubuntu-10.10-desktop-i386.iso
map /ubuntu-10.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.10-desktop-i386.iso splash
initrd /casper/initrd.lz

title Xubuntu 10.10 (XFCE Desktop x86)
find --set-root /xubuntu-10.10-desktop-i386.iso
map /xubuntu-10.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-10.10-desktop-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Kubuntu 10.10 (KDE Desktop x86)
find --set-root /kubuntu-10.10-desktop-i386.iso
map /kubuntu-10.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.10-desktop-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

# Suggested by Ambriel
title Lubuntu 10.10 (LXDE Lightweight Desktop x86)
find --set-root /lubuntu-10.10.iso
map /lubuntu-10.10.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper persistent iso-scan/filename=/lubuntu-10.10.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Ubuntu 10.10 Netbook Remix (NetBook Distro)
find --set-root /ubuntu-10.10-netbook-i386.iso
map /ubuntu-10.10-netbook-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz floppy.allowed_drive_mask=0 noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu-netbook.seed boot=casper persistent iso-scan/filename=/ubuntu-10.10-netbook-i386.iso splash
initrd /casper/initrd.lz

title Ubuntu 10.04.1 (GNOME Desktop x86)
find --set-root /ubuntu-10.04.1-desktop-i386.iso
map /ubuntu-10.04.1-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04.1-desktop-i386.iso splash
initrd /casper/initrd.lz

title Xubuntu 10.04 (XFCE Desktop x86)
find --set-root /xubuntu-10.04-desktop-i386.iso
map /xubuntu-10.04-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-10.04-desktop-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Kubuntu 10.04.1 (KDE Desktop x86)
find --set-root /kubuntu-10.04.1-desktop-i386.iso
map /kubuntu-10.04.1-desktop-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.04.1-desktop-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

# Suggested by Ambriel
title Lubuntu 10.04 (LXDE Lightweight Desktop x86)
find --set-root /lubuntu-10.04.iso
map /lubuntu-10.04.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper persistent iso-scan/filename=/lubuntu-10.04.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Linux Mint 9
find --set-root /linuxmint-9-gnome-cd-i386.iso
map /linuxmint-9-gnome-cd-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper persistent iso-scan/filename=/linuxmint-9-gnome-cd-i386.iso floppy.allowed_drive_mask=0 splash
initrd /casper/initrd.lz

title Peppermint Linux
find --set-root /Peppermint-One-06172010.iso
map /Peppermint-One-06172010.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper persistent iso-scan/filename=/Peppermint-One-06172010.iso splash
initrd /casper/initrd.lz

title Ubuntu 10.04 Netbook Remix (NetBook Distro)
find --set-root /ubuntu-10.04-netbook-i386.iso
map /ubuntu-10.04-netbook-i386.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz floppy.allowed_drive_mask=0 noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu-netbook.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-netbook-i386.iso splash
initrd /casper/initrd.lz

title EasyPeasy 1.6 (NetBook Distro)
find --set-root /EasyPeasy-1.6.iso
map /EasyPeasy-1.6.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz floppy.allowed_drive_mask=0 noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu-netbook.seed boot=casper persistent iso-scan/filename=/EasyPeasy-1.6.iso splash
initrd /casper/initrd.lz

# Suggested by Mario
title Eeebuntu 3.0.1 Netbook Remix (NetBook Distro)
find --set-root /eeebuntu-3.0.1-nbr.iso
map /eeebuntu-3.0.1-nbr.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/eeebuntu-3.0.1-nbr.iso splash
initrd /casper/initrd.gz

# Suggested by Robin McGough
title xPUD 0.9.2 (NetBook Distro)
find --set-root --ignore-floppies --ignore-cd /xpud-0.9.2.iso
map --heads=0 --sectors-per-track=0 /xpud-0.9.2.iso (hd32)
map --hook
chainloader (hd32)

# Suggested by Michel Jank
title Slax 6.1.2 Graphics mode (KDE)
find --set-root /Slax612/boot/initrd.gz
kernel /Slax612/boot/vmlinuz initrd=/boot/initrd.gz ramdisk_size=6666 root=/dev/ram0 rw autoexec=xconf;telinit~4 changes=/Slax612
initrd /Slax612/boot/initrd.gz

title Parted Magic 5.4 (Partition Tools)
find --set-root /pmagic-5.4.iso
map /pmagic-5.4.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)

title Boot gparted (Partition Tools)
find --set-root /gparted/live/initrd.img
kernel /gparted/live/vmlinuz live-media-path=gparted/live boot=live i915.modeset=0 xforcevesa radeon.modeset=0 noswap nomodeset noprompt vga=788 ip=frommedia  nosplash
initrd /gparted/live/initrd.img

# Suggested by Deb
title Partition Wizard 5 (Partition Tools)
find --set-root /pwhe5.iso
map /pwhe5.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)

title Boot Clonezilla
find --set-root /clonezilla/live/initrd1.img
kernel /clonezilla/live/vmlinuz1 boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run='ocs-live-general' ocs_live_extra_param='' ocs_live_keymap='' ocs_live_batch='no' ocs_lang='' vga=788 ip=frommedia nosplash live-media-path=/clonezilla/live toram=filesystem.squashfs
initrd /clonezilla/live/initrd1.img


title Redo Backup and Recovery
find --set-root --ignore-floppies --ignore-cd /redobackup.iso
map --heads=0 --sectors-per-track=0 /redobackup.iso (hd32)
map --hook
chainloader (hd32)

title Kaspersky Rescue CD (Virus Scanner)
find --set-root /rescue/rescue.iso
map /rescue/rescue.iso (0xff)
map --hook
root (0xff)
chainloader (0xff)

title AVG Rescue CD (Anti-Virus + Anti-Spyware)
find --set-root /avg.iso
map /avg.iso (hd32)
map --hook
chainloader (hd32)

# Suggested by Zach
title BitDefender Rescue CD (Virus Scanner)
find --set-root /bitdefender-rescue-cd.iso
map /bitdefender-rescue-cd.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz boot=casper iso-scan/filename=/bitdefender-rescue-cd.iso
initrd /casper/initrd.gz

title AVIRA AntiVir Rescue CD (Virus Scanner)
find --set-root /avira/vmlinuz
kernel /avira/vmlinuz edd=off vga=ask initrd=/avira/initrd.gz ramdisk_size=133551 root=/dev/ram0 rw console=/dev/vc/4
initrd /avira/initrd.gz

title Jolicloud (NetBook Distro)
find --set-root /Jolicloud-1.0.iso
map --heads=0 --sectors-per-track=0 /Jolicloud-1.0.iso (0xff)
map --hook
root (0xff)
kernel /casper/vmlinuz noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/jolicloud.seed boot=casper persistent iso-scan/filename=/Jolicloud-1.0.iso splash
initrd /casper/initrd.gz

title EASUS Disk Copy
find --set-root /DiskCopy2.3.iso
map --mem /DiskCopy2.3.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)

title BackTrack 4 Final (Penetration Testing)
find --set-root /bt-boot/vmlinuz
kernel /bt-boot/vmlinuz BOOT=casper boot=casper persistent rw splash
initrd /bt-boot/initrd.gz
boot

title Install Mandriva Linux Free 2010.0
find --set-root /mandriva/i586/isolinux/alt0/all.rdz
kernel /mandriva/i586/isolinux/alt0/vmlinuz root=(hd0,0) splash=silent
initrd /mandriva/i586/isolinux/alt0/all.rdz

title Install Windows Vista/7
root (hd0,0)
chainloader (hd0,0)/bootmgr

# Suggested by Gino Pilotino
title System Rescue CD
find --set-root /systemrescuecd/isolinux/rescuecd
kernel /systemrescuecd/isolinux/rescuecd subdir=systemrescuecd setkmap=us docache
initrd /systemrescuecd/isolinux/initram.igz

title Trinity Rescue Kit
kernel /TRK/kernel.trk vollabel=MULTIBOOT ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkmenu
initrd /TRK/initrd.trk

# Suggested by Jugal
title Austrumi
find --set-root /austrumi/austrumi.fs
kernel /austrumi/bzImage dousb lang_en
initrd /austrumi/initrd.gz

title WIFIWAY
find --set-root /WIFI/boot/initrd.gz
kernel /WIFI/boot/vmlinuz vga=791 max_loop=255 ramdisk_size=6666 root=/dev/ram0 rw autoexec=xconf;telinit~4 changes=/changes/changes.dat
initrd /WIFI/boot/initrd.gz

Thanks a million for your help its surely needed and respected.

-infringer-