socket recv problems

Hello!
I am writing an application that should be able to receive html-pages. But i have some problems to receive the sides. IT seems if i could successfully connect to the host and open a stream socket that is listening on port 80. when i send the command "GET /" to the server it seems if it arrives successfully but when i try to receive the incomming data i get the errorcode WSAECONNRESET.
I don´t know how to find the error, because i don´t know if the preceding connection was successfully. How can i figured it out. Is there a possibility. I started my firewall that tells me that my application wants to connect to the server. But why i am not abel to recv the data. Here is my piece of code....

Code:

---

int Socket::recv_all( std::string& s )
{
        std::string::iterator at = s.begin();
        int received; //Bytes send

        fd_set master;

        FD_ZERO( &master );        //Set fd_set to NULL
        FD_SET( fdscp, &master ); //Adds discriptor to fd_set

        char buffer[255];

        int res = select( fdscp+1, &master, NULL, NULL, NULL );

        if ( res == SOCKET_ERROR )
                throw SocketException( "Select: SOCKET_ERROR" );
       
        if ( FD_ISSET( fdscp, &master ) )
        {
                received = recv( fdscp, buffer, 255/*at, DATASIZE*/, 0 );

                if ( !received )
                        throw SocketException( "Connection was closed" );

                if ( received == SOCKET_ERROR )
                        throw SocketException( "SocketError in recv_all" );

                if ( received == WSAEMSGSIZE )
                        throw SocketException( "Message larger as buffer" );

                std::cout << buffer ;
        }

        return received;
}

---

Thanks in advance

I tried something but it still doesn´t work. When i send the string "GET / HTTP/1.0" to the server and i try to read the data then my programm stops without any error-msg. My programm wait at the command select or at the command recv. It seems so if my programm tries to receive data but it will not get it.

I don't know what the error is with the short description and code you posted... But I wrote something like that a few months ago. I posted it here at CodeGuru for another guy. Here is the thread:
http://www.codeguru.com/forum/showth...hlight=wwwgrab
Look a bit down in the thread for wwwgrab.zip. It's plain C and blocking sockets. Good luck.

The error means:


The virtual circuit was reset by the remote side executing a hard or abortive close. The application should close the socket as it is no longer usable. On a UPD-datagram socket this error would indicate that a previous send operation resulted in an ICMP "Port Unreachable" message.

Thanks fpr the answers but they don´t lead to solve my problem. Mick_2002 i also read this in the documentation but what can be the reason for this?
Thanks for the www-grabber but i look at this and i couldn´t find any differences in your and my code concering the allocation of the socket.
Here is my code where i try to get the socket.

Code:

---

//allocation of the socket
if ( (hten = gethostbyname( host )) == NULL )
      throw SocketException( "Client: gethostbyname" );

sock_struct.sin_addr = *((in_addr *)hten->h_addr);//Set to my IP
sock_struct.sin_family        = PROTOCOL_FAMILY;                        //Set protocol familiy ( must be AF_INET )
sock_struct.sin_port        = htons(port);                                //Set port
memset( &(sock_struct.sin_zero), '\0', 8 );

if ( (fdscp = socket( PROTOCOL_FAMILY, socketTyp, 0 )) == INVALID_SOCKET )
        throw SocketException( "socket" );

//Send method
while ( total )
{
        int n = send( fdscp, "GET / HTTP/1.0\n\n", 16, 0 );

        if ( n == SOCKET_ERROR )
                throw SocketException( "SocketError in send_all" );

        if ( n == WSAEMSGSIZE )
                throw SocketException( "Message to long to send" );

        asend += n;
        total -= n;
}

---

My problem is that my programm stops while receiving data. why ?????

I don´t know why but my programm works fine for another URLs. I tried to receive data from www.heise.de but the server will not return any data after i sent GET / HTTP/1.0\n\n. But then i tried receive data from www.yahoo.de and it works fine. Could it be that www.heise.de doesn´t know the command GET i sent?
I tried to connect to www.heise.de with telnet and receive data with the GET command. What is wrong with my code?

j0nas i tried your application an it doesn´t work, too!

Thanks...

There is a demo project
with tear.c
in the MSDN.
I does not have any problem with the
www.heise.de.

download it and have a look at the code
http://search.microsoft.com/gomsuri....e_mfc_tear.asp

Haha!
You are using MFC and i don´t want to use it.

It did not want to urge zou to use MFC, I just wanted to encourage you to learn from working things.

This MFC sample has a
QueryInfo(HTTP_QUERY_RAW_HEADERS_CRLF, strNewLocation) and this is the content
of the string for both sites
Maybe this rings you a bell.

This is www.yahoo.de
with one redirection.
{"HTTP/1.1 302 Found
Date: Sat, 12 Oct 2002 17:34:38 GMT
Location: http://de.yahoo.com/
Transfer-Encoding: chunked
Content-Type: text/html; charset=iso-8859-1
"}
{"HTTP/1.1 302 Found
Date: Sat, 12 Oct 2002 17:38:48 GMT
Location: http://de.yahoo.com/
Transfer-Encoding: chunked
Content-Type: text/html; charset=iso-8859-1

"}

This is the www.heise.de
{"HTTP/1.1 200 OK
Date: Sat, 12 Oct 2002 17:36:32 GMT
Server: Apache/1.3.26
Connection: close
Transfer-Encoding: chunked
Content-Type: text/html
"}

I got it to work now... Both of us use HTTP 1.0. They (www.heise.de) must have configured their HTTP server to only accept HTTP 1.1.

I think the "HOST:" header tag in HTTP1.1 made it work. I monitored a Internet Explorer 6.0 session against the site (with a free network analyzing tool) and took almost every thing from the HTTP1.1 header IE sent and put it into my wwwgrab utility.

This is what IE6 sent:

Code:

---

GET / HTTP/1.1
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/msword, */*
Accept-Language: en-us,sv;q=0.5
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; T312461)
Host: www.heise.de
Connection: Keep-Alive

---

I removed all three "Accept" lines (it will of course work with them too). I also change the "User-Agent" value to "wwwgrab".

Let me know if you need my updated version of wwwgrab. I highly recommend you to use some network monitor tool. It's very handy in cases like this.

can you recommend me some of your network tools

Could you send me the new version of your grabber..

Quote:

---

Originally posted by kakalake
can you recommend me some of your network tools

---

Yes. I installed WinPcap (a free packet capture driver) from http://windump.polito.it. This is just the driver. You then need a display and analyzing tool. Windump.exe is a console program (the Unix version is called TcpDump). You can download it from the same place as WinPcap.

I didn't use windump. I instead found a free GUI app that is based on WinPcap. Here is link: http://www.ethereal.com/distribution/win32

Quote:

---

Originally posted by kakalake
Could you send me the new version of your grabber..

---

Sure, here it is:

Thanks a lot j0nas. How can i rate you??