Convert BSAVE (BSV) to BMP or other common format?
I wasn't sure where to put this post, so I decided to just put it here since it's related to BASIC (GWBASIC). (Feel free to move it somewhere else if there is a better place)
I have a project at work that I'm working on. I am trying to convert a BSAVEd image to a file format that is easily recognized by mspaint. I have searched and searched and can't find anything. I found some that will work in reverse (bmp to bsv), but that obviously doesn't help. I would like to have it run from within my gwbasic program using the SHELL command with arguements. It's just a monochrome screen grab.
Any help would be greatly appreciated.
Side note: we are trying to replace a line printer with a laser printer. I was planning writing the text to a file and the associated graphic to a file and just print them as files instead of line by line, which wouldn't work on the laser printer. If anyone has any better creative solutions to this, please let me know.
Re: Convert BSAVE (BSV) to BMP or other common format?
GW-Basic! I have the manual somewhere!
God! I haven't used GW-BASIC since I was eight years old!
Sorry - I think I threw out the manual last time I moved.
Oh well. Good luck!
[Mods/Admins - Feel free to delete the post. It's been 10 years since I heard someone mention GW-Basic!]
Re: Convert BSAVE (BSV) to BMP or other common format?
I think you'd be better off starting again with Visual Studio Express, which is FREE. There are different flavors to choose from, including C# and VB.Net.
Re: Convert BSAVE (BSV) to BMP or other common format?
Well, the problem is that this configuration has been used for many years and I don't think they plan on changing it any time soon. Unfortunately, I'm stuck using GWBASIC.
I thought it might be easier just to capture the screen, but I cant find a screen capture program that will execute from within gwbasic through the shell command. I tried Screen Thief (v 2.01) for DOS, but it needs keystrokes from the user to capture the screen. I need it to capture as soon as the program runs.
Re: Convert BSAVE (BSV) to BMP or other common format?
Is there a way to force key commands from gwbasic? Or is there a way to force key commands through C?
Re: Convert BSAVE (BSV) to BMP or other common format?
We came up with another solution, so this post can be disregarded. Although, I wouldn't mind hearing any suggestions for my own peace of mind.
Thanks
Re: Convert BSAVE (BSV) to BMP or other common format?
Do you mind posting that solution? Other readers might enjoy that.
Re: Convert BSAVE (BSV) to BMP or other common format?
Quote:
Originally Posted by S_M_A
Do you mind posting that solution? Other readers might enjoy that.
Unfortunately, our "solution" had nothing to do with correcting the problem I mentioned above. We were trying to replace a line-printing (dot matrix style) printer with a network printer. The old printer was malfunctioning. Instead of converting our data to a more friendly format to use with a network printer, we just replaced the printer with another old dot matrix style printer.
It was a decision I made because I felt I was spending too much time on it.
Re: Convert BSAVE (BSV) to BMP or other common format?
Quote:
Originally Posted by Tineras
Well, the problem is that this configuration has been used for many years and I don't think they plan on changing it any time soon. Unfortunately, I'm stuck using GWBASIC...
Why not just save the BMP in GWBASIC?
That is pretty easy although after considering some of your other posts on this, interfacing directly with a laser requires a different printer control language (PCL) than with a dot matrix so it might help if you just dumped the image into the appropriate PCL instead of the BMP format.
Interfacing with a laser will mean that you will probably want to use mixed text and graphics mode of some sort if you want to print something besides the image.
The dot matrix has an effective resolution of 144 x 72 on most as a lowest common denominator. Bitmapping this is a little tricky because like the Commodore 64 screen, bit masking is in 8 x 8 blocks which is how the pins fire.
Also scaling needs to be done from screen resolution to the printer dpi.
If the laser printer supports HP PCL this is pretty doable, but begs the question why not rewrite this as a WIN32 C console application and use a windows printer device context like I do in my ClipShop program?
Ye Olde ClipShoppe Deluxe
I can't say that I haven't written in VB since I was eight years old and I didn't need a manual to begin with, but going directly with the WIN32 API in a C program is generally the easiest for this type of thing for me anyway.
You can use the command line compiler in Visual Express 2005 with the Win32 extensions or just go GNU with MinGW.
If you decide to stay in GWBASIC you still might consider using a print spooler of sorts written in C.
Or a print server written in VB6 or whatever.
Bill Buckels
Code:
100 REM Bsv2Bmp.BAS by Bill Buckels Aug 2008
101 REM This program is herewith released into the Public Domain
102 REM Use and Copy Freely
103 REM -------------------
104 REM A GWBASIC Example Program
105 REM Demonstrates Saving a Monochrome BMP
106 REM From a 640 x 200 Monochrome BSaved Image
107 REM Variations on this program are relatively easy
110 REM -------------------
120 REM I have used a RANDOM ACCESS file for output
121 REM This is a BINary file in its crudest form.
122 REM -------------------
130 REM The header information for other output file formats
131 REM can be obtained by creating a BMP
132 REM in Windows Paint, then calculating how big
133 REM the body is to determine the header
134 REM followed by viewing and typing the header info
135 REM in a format that can be used in here.
136 REM However you need to know how to store the
137 REM image data in a BMP compatible manner
138 REM -------------------
140 REM This is not meant to be a lesson in GWBASIC
141 REM I am assuming that if you are writing in GWBASIC
142 REM that you know the language. RFM
142 REM -------------------
200 DEFINT A-Z : KEY OFF
201 SCREEN 0 : CLS
202 REM --------------------
203 REM Get the filenames...
204 REM Replace this with your own more elegant routines
205 REM Or an automated naming routine.
206 REM --------------------
210 INPUT "Enter BSaved FileName:", BSV$
211 INPUT "Enter BMP Output Name:", BMP$
212 INPUT "Reverse Video (Y/N)"; REV$
220 REM --------------------
221 REM Load the input file to the screen
222 REM --------------------
223 SCREEN 2
224 DEF SEG = &HB800
225 BLOAD BSV$,0
226 DEF SEG
230 REM --------------------
231 REM Reverse Video for Printing if needed
232 REM --------------------
233 IF REV$ = "Y" OR REV$ = "y" THEN GOSUB 6000
236 REM --------------------
237 REM Read the screen and create the BMP file
238 REM --------------------
239 OPEN "R",1,BMP$,1
240 FIELD 1,1 AS V$
241 REM write the BMP header
242 RESTORE 8000
243 READ VLEN
244 FOR I = 1 TO VLEN
245 READ V
246 LSET V$ = CHR$(V)
247 PUT 1
248 NEXT I
249 REM Write the BMP image body
500 REM The CGA Screen Memory Starts at $B800
501 REM The Interleaf is offset by 8192 bytes
502 REM A BMP file is upside-down
503 REM So we need to offset to the last raster
504 REM and walk backwards through the interleaves
505 LEAF1 = 7920
506 LEAF2 = 16112
507 DEF SEG = &HB800
510 FOR Y = 1 TO 100
520 REM Odd Interleaf - write twice
521 FOR S = 1 TO 2
522 FOR X = 0 TO 79
523 V = PEEK(LEAF2+X)
524 LSET V$ = CHR$(V)
525 PUT 1
526 NEXT X
527 NEXT S
528 REM Decrement Interleaf Offset
529 LEAF2 = LEAF2 - 80
530 REM Even Interleaf - write twice
531 FOR S = 1 TO 2
532 FOR X = 0 TO 79
533 V = PEEK(LEAF1+X)
534 LSET V$ = CHR$(V)
535 PUT 1
536 NEXT X
537 NEXT S
538 REM Decrement Interleaf Offset
539 LEAF1 = LEAF1 - 80
540 NEXT Y
550 DEF SEG
600 CLOSE 1
650 SCREEN 0
660 REM EXIT TO DOS
700 SYSTEM
6000 REM REVERSE VIDEO SUBROUTINE
6010 DIM PIC(8002) 'picture buffer
6020 GET (0,0)-(639,199), PIC
6030 PUT (0,0),PIC,PRESET
6040 ERASE PIC
6050 RETURN
8000 REM 640 x 400 Monochrome BMP header (62 bytes)
8010 REM DATA below is Length followed by Ascii Values
8020 REM Ascii values are expressed in Hexadecimal
8030 DATA 62
8040 DATA &H42, &H4D, &H3E, &H7D, &H00, &H00, &H00, &H00
8050 DATA &H00, &H00, &H3E, &H00, &H00, &H00, &H28, &H00
8060 DATA &H00, &H00, &H80, &H02, &H00, &H00, &H90, &H01
8070 DATA &H00, &H00, &H01, &H00, &H01, &H00, &H00, &H00
8080 DATA &H00, &H00, &H00, &H7D, &H00, &H00, &H00, &H00
8090 DATA &H00, &H00, &H00, &H00, &H00, &H00, &H00, &H00
8100 DATA &H00, &H00, &H00, &H00, &H00, &H00, &H00, &H00
8110 DATA &H00, &H00, &HFF, &HFF, &HFF, &H00
9000 REM The End
Re: Convert BSAVE (BSV) to BMP or other common format?
Quote:
Originally Posted by Tineras
Unfortunately, our "solution" had nothing to do with correcting the problem I mentioned above... <snip>It was a decision I made because I felt I was spending too much time on it.
I hear ya! Printers can be a time-consuming exercise. However if you should need to revisit this later and want to do an HP PCL compatible interface for this legacy system, I have lots of old code like the following that you can modify for the occasion.
Perhaps when you run-out of ribbons. Modifying this to run in GWBASIC probably wouldn't take much. This is the shortest example I have for the HP.
Bill
Code:
// BV> I need source to print graphics on a HP laserjet/deskjet
// BV > w/o color...
// hpixel.c by bill buckels 1994
// short example of writing mixed text and graphics
// on the hp printer. use and copy freely
#include <dos.h>
#include <stdio.h>
#define VGA 0x12
#define TEXT 0x03
union REGS inregs, outregs;
// set and get video mode
unsigned char setcrtmode(unsigned char vidmode)
{
inregs.h.ah = 0;
inregs.h.al = vidmode; // set mode
int86(0x10,&inregs,&outregs);
inregs.h.ah = 0x0f; // get mode
int86(0x10,&inregs,&outregs);
return outregs.h.al; // return mode
}
// simple write dot
void wdot(unsigned x, unsigned y, unsigned char color)
{
inregs.h.ah = 0x0c;
inregs.h.al = color;
inregs.h.bh = 0;
inregs.x.cx = x;
inregs.x.dx = y;
int86(0x10,&inregs,&outregs);
}
// simple draw box
void wbox(int x1, int y1, int x2, int y2, unsigned char color)
{
int x,y;
x2++;
for(x=x1;x<x2;x++)wdot(x,y1,color); // top of box
x2--;y1++;
for(y=y1;y<y2;y++)
{
wdot(x1,y,color); // middle of box
wdot(x2,y,color);
}
x2++;
for(x=x1;x<x2;x++)wdot(x,y2,color); // bottom of box
}
// centre justified simple text
int wtext(char *str, int x, int y, unsigned char colorvalue)
{
int scanline,byte,character,nibble,counter,target=strlen(str);
unsigned char far *romfont=(unsigned char far *) 0xffa6000eL;
// a pointer to the 8 x 8 BITMAPPED font in the PC ROM
for(counter=0;counter<target;counter++){
if(str[counter]<' '||str[counter]>'z')str[counter]=32;
}
x=(x-(target*4)); // extrapolate the left edge
for (scanline=0;scanline<8;scanline++) // finish the current scanline
{ // before advancing to the next
for (byte=0;byte<target;byte++) // run the scanline
{ // use the current character as an indices for the font
character = romfont[(str[byte]&0x7f)*8+scanline];
for (nibble=0;nibble<8;nibble++)
if (character & 0x80>>nibble)
wdot(x+byte*8+nibble,y,colorvalue);
}
y++;
}
}
// simple read dot
unsigned char rdot(unsigned x, unsigned y)
{
inregs.h.ah = 0x0d;
inregs.h.bh = 0;
inregs.x.cx = x;
inregs.x.dx = y;
int86(0x10,&inregs,&outregs);
return outregs.h.al;
}
// basic hp pcl printer codes - refer to manual
char reset[] ={ 0x1B,0x45};
char linesperinch[]={ 0x1B,0x26,0x6C,0x36,0x44}; // 6 lpi
char left_column[] ={ 0x1B,0x26,0x6C,
0x31,/* left column here */ 0x4C};
char fontstyle[] ={ 0x1B,0x28,0x31,0x30,0x55}; // IBM-PC (USA)
char prolog[] ={ 0x1B,0x29,0x30,0x4E,
0x1B,0x29,0x73,0x30,0x42,
0x1B,0x26,0x6C,0x36,0x30,0x46};
char resolution[] ={ 0x1B,0x2A,0x74,
'3','0','0', /* 300 dpi */ 0x52};
char epilog[] ={ 0x1B,0x2A,0x70,0x2D,0x34,0x30,0x59,
0x1B,0x2A,0x72,0x41};
char blank_line[] ={ 0x1B,0x2A,0x62,0x57};
char image_line[] ={ 0x1B,0x2A,0x62,
'1','6','0', /* 160 bytes */ 0x57};
char form_feed[] ={ 0x0c};
char line_feed[] ={ 0x0d,0x0a};
int main(int argc, char *argv[])
{
FILE *fp;
char buffer[128];
unsigned char ditherbuffer1[160],ditherbuffer2[160];
unsigned int color;
unsigned char tempcolor,tempcolor1,tempcolor2;
unsigned char tempdither1,tempdither2;
unsigned x,y,x2,y2;
// create a simple graphic...
if(setcrtmode(VGA)!=VGA)
{
puts("VGA Adapter Required");return 0;
}
sprintf(buffer, "Printed using HPIXEL by Bill Buckels");
tempcolor=0;
for(x=0;x<176;x+=8)
{
wbox(x,x,639-x,479-x,(tempcolor%15)+1); tempcolor++;
}
// do the printer setup...
inregs.h.ah = 2;
inregs.x.dx = 0; // assume = LPT1 = 0
int86(0x17,&inregs,&outregs);
if(outregs.h.ah!=0x90)
{
wtext("Printer On LPT1 Not Responding...",319,235,15);
if(getch()==0)getch();
setcrtmode(TEXT);return 0;
}
wtext(buffer,321,237,1);wtext(buffer,319,235,14);
fp=fopen("prn","wb");
fwrite(reset,sizeof(reset),1,fp);
fwrite(linesperinch,sizeof(linesperinch),1,fp);
fwrite(left_column,sizeof(left_column),1,fp);
fwrite(fontstyle,sizeof(fontstyle),1,fp);
fwrite(prolog,sizeof(prolog),1,fp);
fwrite(resolution,sizeof(resolution),1,fp);
fwrite(epilog,sizeof(epilog),1,fp);
// print the graphic...
for(y=0;y<480;y++)
{
x=0; // traverse 4 pixels per byte
for(x2=0;x2<160;x2++) // create a dither
{
tempcolor=rdot(x,y); x++;
tempcolor1 = tempcolor>>2;
tempcolor2 = tempcolor-tempcolor1;
tempdither1 = (tempcolor1<<6);
tempdither2 = (tempcolor2<<6);
tempcolor=rdot(x,y); x++;
tempcolor1 = tempcolor>>2;
tempcolor2 = tempcolor-tempcolor1;
tempdither1 |=(tempcolor1<<4);
tempdither2 |=(tempcolor2<<4);
tempcolor=rdot(x,y); x++;
tempcolor1 = tempcolor>>2;
tempcolor2 = tempcolor-tempcolor1;
tempdither1 |=(tempcolor1<<2);
tempdither2 |=(tempcolor2<<2);
tempcolor=rdot(x,y); x++;
tempcolor1 = tempcolor>>2;
tempcolor2 = tempcolor-tempcolor1;
tempdither1 |=tempcolor1;
tempdither2 |=tempcolor2;
ditherbuffer1[x2]=tempdither1;
ditherbuffer2[x2]=tempdither2;
}
// send it to the printer - pelsize 2 bits wide x 2 bits high
fwrite(image_line,sizeof(image_line),1,fp);
fwrite(ditherbuffer1,160,1,fp); // 160 bytes
fwrite(image_line,sizeof(image_line),1,fp);
fwrite(ditherbuffer2,160,1,fp); // 160 bytes
}
// write some blank lines and a title line...
for(x=0;x<50;x++)fwrite(blank_line,sizeof(blank_line),1,fp);
fwrite(buffer,strlen(buffer),1,fp);
// clean up and quit
fwrite(form_feed,sizeof(form_feed),1,fp);
fwrite(reset,sizeof(reset),1,fp);
fclose(fp);
setcrtmode(TEXT);
return 0;
}
