[RESOLVED] Socket Programming Client/Server Over the Internet Question

Hello everyone,
I am trying to make a Client/Server Socket Program that can connect between two computers over the Internet. What the program does is just send messages back and forth, like a very basic IM. I have been successful so far in connecting two computers within the same network (like at my school) but unsuccessful at connect my laptop to my computer back at my house. I have looked on the Internet for answers and my professor talked about using a DNS resolver but I am still a bit confused on what I need to do in order to get the client and server programs to connect to each other. I've read that the gethostbyname() function is supposed to have something to do with the DNS resolver but I'm still a bit confused as to if I am using it correctly. There are two executables server.exe and client.exe. Both server.c and client.c use another c file called talk.c. This is where the send() and recv() functions are to send and receive data. Here is the code:

Server.c:

Code:

---

#include        <winsock2.h>
#include        <stdio.h>
#include        <string.h>

#define HOSTNAMELEN    128
#define BUFLEN  80



int main(int argc, char *argv[]) {
        void runTalk(SOCKET);

        char serverHostName[HOSTNAMELEN];
        int on = 1;
        int port;
        int clientLen;
        int newSkt, skt;
        int length;
        SOCKADDR_IN client;                        // Client's IP address
        SOCKADDR_IN listener;                // Server's listener address
        struct hostent  *host;                // Server's host information

//WSAStartup parameters
        WORD wVersionRequested;
        WSADATA wsaData;


        wVersionRequested = MAKEWORD(2, 2);                // Version 2.0
        if(WSAStartup(wVersionRequested, &wsaData) != 0) {
                fprintf(stderr, "Process failed on WinSock startup\n");
                ExitProcess(0);
        };


// Get the server host name and port number from the command line
        switch(argc) {
        case 1:
                if(gethostname(serverHostName, HOSTNAMELEN) != 0) {
                        fprintf(stderr, "Unable to get local host name\n");
                        fprintf(stderr, "Error number: &#37;d\n", WSAGetLastError());
                        ExitProcess(1);
                }
                break;
        case 2:
                strcpy(serverHostName, argv[1]);
                break;
        default:
                fprintf(stderr, "Usage: client <port no.> [<server_host>]\n");
                ExitProcess(0);
        };
        fprintf(stderr, "Server host: %s\n", serverHostName);
        port = 0;        // Let bind choose the port number

// Set up a socket for listening
        skt = socket(AF_INET, SOCK_STREAM, 0);
        host = gethostbyname(serverHostName);
        ZeroMemory(&listener, sizeof(SOCKADDR_IN));
        listener.sin_family = AF_INET;
        listener.sin_port = htons((u_short) port);
        CopyMemory(&listener.sin_addr, host->h_addr_list[0], host->h_length);
        fprintf(stderr, "IP Address: %s\n", inet_ntoa(listener.sin_addr));

// Advertise listener's name
        if(bind(skt, (const struct sockaddr FAR *) &listener, sizeof(listener))) {
                fprintf(stderr, "Bind error #%d\n", WSAGetLastError());
                ExitProcess(1);
        }
// Report the port number to the user
        length = sizeof(listener);
        getsockname(skt, (struct sockaddr FAR *) &listener, &length);
        fprintf(stderr, "Server port number: %d\n", ntohs(listener.sin_port));

// Now begin waiting for a request
        listen(skt, SOMAXCONN);
        fprintf(stderr, "Listening ... ");

// Wait for client requests
        clientLen = sizeof(SOCKADDR_IN);
        newSkt = accept(skt, (SOCKADDR *) &client, &clientLen);
        fprintf(stderr, "accepted connection request \n");
        closesocket(skt);                        // Get rid of listener socket
        runTalk(newSkt);

// Clean up and quit
        closesocket(newSkt);
        WSACleanup();
        return 0;
}

---

Client.c:

Code:

---

#include        <winsock2.h>
#include        <stdio.h>
#include        <string.h>

#define        HOSTNAMELEN        128

int main (int argc, char *argv[]) {
        void runTalk(SOCKET);

        int on = 1;
        int port;      /* Internet port number */
        char serverHostName[HOSTNAMELEN];
        SOCKET skt;
        LPHOSTENT  host;
        SOCKADDR_IN listener;

//WSAStartup parameters
        WORD wVersionRequested;
        WSADATA wsaData;


// Must start the package before calling any WSA function
        wVersionRequested = MAKEWORD(2, 2);                // Version 2.0
        if(WSAStartup(wVersionRequested, &wsaData) != 0) {
                fprintf(stderr, "Process failed on WinSock startup\n");
                ExitProcess(0);
        };

// Get server name and port number
        switch(argc) {
        case 2:
                if(gethostname(serverHostName, HOSTNAMELEN) != 0) {
                        fprintf(stderr, "Unable to get local host name\n");
                        fprintf(stderr, "Error number: %d\n", WSAGetLastError());
                        ExitProcess(1);
                }
                break;
        case 3:
                strcpy(serverHostName, argv[2]);
                break;
        default:
                fprintf(stderr, "Usage: client <port no.> [<server_host>]\n");
                fprintf(stderr, "(Must start Server first to get port no.)\n");
                ExitProcess(0);
        };
        fprintf(stderr, "Server host: %s\n", serverHostName);
        port = atoi(argv[1]);
        fprintf(stderr, "Server port number: %d\n", port);

// Set up a socket to talk to the server
        skt = socket(AF_INET, SOCK_STREAM, 0);
        host = gethostbyname(serverHostName);
        ZeroMemory(&listener, sizeof(SOCKADDR_IN));
        listener.sin_family = AF_INET;
        listener.sin_port = htons((u_short) port);
        CopyMemory(&listener.sin_addr, host->h_addr_list[0], host->h_length);

        fprintf(stderr, "Making connection request ... ");
        if        (connect(
                                skt,
                                (const struct sockaddr FAR *) &listener,
                                sizeof(SOCKADDR_IN))
                != 0
                ) {
                        fprintf(stderr, "Connect error #%d\n", WSAGetLastError());
                        ExitProcess(1);
        };
        fprintf(stderr, "connected\n");


/* Run the local end of the talk session */
        runTalk(skt);

/* All done -- tear down the circuit */
        closesocket(skt);

        WSACleanup();
        return 0;
}

---

Talk.c:

Code:

---

#include        <winsock2.h>
#include        <winbase.h>
#include        <conio.h>
#include        <stdio.h>
#include        <io.h>

#define BUFLEN  80
#define STDIN  0

int errno;      // For nonblocking read flag


void runTalk(SOCKET skt) {
        int len;
        int on = 1;
        char buffer[BUFLEN];
        int flags = 0;                        // Used with recv
        int numberRead;

// Make socket nonblocking
        ioctlsocket(skt, FIONBIO, &on);

        printf(">");
        fflush(stdout);
        while (TRUE) {
        // Poll the skt
                if ((len = recv(skt, buffer, BUFLEN, flags)) > 0) {
                // Incoming info from the remote process, write stdout
                        buffer[len] = '\0';
                        printf(buffer);
                        Sleep(100);
                        printf(">");
                        fflush(stdout);
                }

        // Poll the console
                if(_kbhit()) {
                                numberRead = _read(STDIN, buffer, BUFLEN);
                                send(skt, buffer, numberRead, errno);
                                Sleep(100);
                                printf(">");
                                fflush(stdout);
                }
        }
}

---

Please let me know what you think! Thanks!

Oh and the server.exe can be clicked on to run, but the client must be ran through the command prompt. The client.exe requires two command line parameters, the first being the port that the server has chosen and the second being the IP Address... Hope to get this working soon!

Quote:

---

Originally Posted by zebdor44

I have been successful so far in connecting two computers within the same network (like at my school) but unsuccessful at connect my laptop to my computer back at my house. I have looked on the Internet for answers and my professor talked about using a DNS resolver but I am still a bit confused on what I need to do in order to get the client and server programs to connect to each other.

---

There are a couple of possible reason why you can't connect to your home computer:
1. Is one of the PC behind firewall (I am not talking about windows firewall)? *Usually your school will have a firewall.
2. If one of the PC is in school, how do you usually access the web, through a proxy server? If yes, then you have to consider this proxy server in your code implementation.
3. Is your home laptop hidden behind a router? Ensure that the laptop is using a visible public IP.

As long as you have the correct network configuration and each machine IP addresses, you should be able to connect them both.

thanks for the tips! i got it to work. I used port forwarding on my home router and it worked

Quote:

---

Originally Posted by zebdor44

thanks for the tips! i got it to work. I used port forwarding on my home router and it worked

---

Now go for the DNS resolver,you can register your dynamic dns at http://www.dyndns.com/.

Hello zebdor44,

I am curious sthng about your code. Do you execute client and server .c files on different projects on the same computer. Or do you put both client, server and task .c files in the same project.
Because when I execute it on different project, first I execute server.c and then when I compile client.c, It says that I should start server first but I guess I ve already started server when I execute server.c because it prints out that it is listening.

I ll appreciate it if you help me asap.

Thanks

hey,
need help!!
I have copied the server.exe to another pc..but i cant run the exe file to test my program on 2 diff computer....why??

hi Frd.,

i need the code which u have modifed and which worked accross internet could u mail me the codings as it would be very helpful for me...
nezammca @ gmail com