Stack Overflow Error?

I am writing a program to act as a postage calculator. I am getting a stack overflow error and I can't for the life of me figure out WHY it is happening. Can one of you gents point me in the right direction??

Code:

---

namespace Lab2
{
    public class Package
    {
        private string FName;
        private string LName;
        private string Address;
        private string City;
        private string State;
        private string ZipCode;
        private decimal Weight = 0.0M;// in ounces
        private decimal Cost = 0.00M;// per ounce

        // constructor
        public Package(string FirstName1, string LastName1, string Address1, string City1, string State1,
            string ZipCode1, decimal Weight1, decimal Cost1)
        {
            // implicit call to object constructor
            FName = FirstName1;
            LName = LastName1;
            Address = Address1;
            City = City1;
            State = State1;
            ZipCode = ZipCode1;
        }// end Package constructor

        // read-only property that gets first name
        public string FirstName1
        {
            get
            {
                return FName;
            }// end get
        }// end property FirstName1

        // read-only property that gets last name
        public string LastName1
        {
            get
            {
                return LName;
            }// end get
        }// end property LastName1

        // read-only property that gets address
        public string Address1
        {
            get
            {
                return Address;
            }// end get
        }// end property Address11

        // read-only property that gets city
        public string City1
        {
            get
            {
                return City;
            }//end get
        }// end property City1

        // read-only property that gets state
        public string State1
        {
            get
            {
                return State1;
            }//end get
        }// end property State1

        // read-only property that gets zip
        public string ZipCode1
        {
            get
            {
                return ZipCode;
            }// end get
        }// end property ZipCode1

        // read-only property that gets weight
        public decimal Weight1
        {
            get
            {
                return Weight;
            }// end get
            set
            {
                Weight = (value < 0) ? 0 : value;
            }// end set
        }// end property Weight1

        // read-only property that gets cost
        public decimal Cost1
        {
            get
            {
                return Cost;
            }//end get Cost1
            set
            {
                Cost = (value < 0) ? 0 : value;
            }// end set
        }// end property Cost1

        // Calculate cost
        public virtual decimal CalculateCost()
        {
            return Weight1 * Cost1;
        }// end method CalculateCost

        // return string representation of Package object
        public override string ToString()
        {
            return string.Format(
                "{0}: {1} {2}: \n{3}: {4}\n{5}: {6} \n{7}: {8}\n{9}: {10}: \n{11}: {12} \n{13:F2}: {14} \n{15:C}: {16}",
                "Sender's First Name", FirstName1,
                "Sender's LastName1", LastName1,
                "Address", Address1,
                "City", City1,
                "State", State1,
                "ZipCode",ZipCode1,
                "Weight", Weight1,
                "Cost", Cost1);
        }// end ToString method

    }// end class Package
}// end namespace Lab2

 

namespace Lab2
{
    public class TwoDayPackage : Package
    {
        private decimal Fee = 5.00M;// 2-day flat fee delivery charge

        //derived class constructor
        public TwoDayPackage(string FirstName1, string LastName1, string Address1, string City1,
            string State1, string ZipCode1, decimal Weight1, decimal Cost1)
            : base(FirstName1, LastName1, Address1, City1, State1, ZipCode1, Weight1, Cost1)
        {
            Fee1 = Cost1;
        }// end constructor

        // property that gets and sets
        public decimal Fee1
        {
            get
            {
                return Fee;
            }// end get
            set
            {
                Fee = (value < 0) ? 0 : value;
            }// end set
        }// end property Fee1

        // calculate total cost
        public override decimal CalculateCost()
        {
            return Fee1 + base.CalculateCost();
        }// end method CalculateCost

        // return string representation of TwoDayPackage
        public override string ToString()
        {
            return string.Format("Fee {0}\nFee: {1:C}",
                base.ToString(), Fee1);
        }// end method ToString
    }// end class TwoDayPackage
}// end namespace Lab2

 

namespace Lab2
{
    public class OverNightPackage : Package
    {
        private decimal AddFee = 10.00M;// additional fee per ounce for overnight delivery

        // derived class constructor
        public OverNightPackage(string FirstName1, string LastName1, string Address1, string City1, string State1,
            string ZipCode1, decimal Weight1, decimal Cost1)
            : base(FirstName1, LastName1, Address1, City1, State1, ZipCode1, Weight1, Cost1)
        {
            AddFee1 = Cost1;
        }// end constructor

        // property for AddFee1
        public decimal AddFee1
        {
            get
            {
                return AddFee;
            }// end get
            set
            {
                AddFee = (value < 0) ? 0 : value;
            }// end set
        }// end property AddFee1

        // calculate cost
        public override decimal CalculateCost()
        {
            return AddFee1 + base.CalculateCost();
        }// end method CalculateCost

        // return string representation of OverNightPackage
        public override string ToString()
        {
            return string.Format("Cost {0}\nAdditional Fee: {1:C}",
                base.ToString(), AddFee1);
        }// end method ToString
    }// end class OverNightPackage
}// end namespace Lab2

 

namespace Lab2
{
    public class PackageTest
    {
        public static void Main(string[] args)
        {
            // instantiate Package object
            Package Sender = new Package("Jane", "Doe", "121 Broad St", "Houston", "Texas", "77077",
                5.0M, 10.00M);
            Sender.CalculateCost();
            Console.WriteLine(Sender.ToString());

            // instantiate TwoDayPackage object
            TwoDayPackage TwoDayPkg = new TwoDayPackage("John", "Doe", "1201 Main St",
                "Dallas", "Texas", "75208", 7.5M, 13.00M);

            // instantiate OverNightPackage object
            OverNightPackage OverNightPkg = new OverNightPackage("Mary", "Bloom", "540 River Lane",
                "Dallas", "Texas", "75055", 3.0M, 7.50M);

            // display Sender data
            Console.WriteLine("First name is: {0}", Sender.FirstName1);
            Console.WriteLine("Last name is: {0}", Sender.LastName1);
            Console.WriteLine("Address is: {0}", Sender.Address1);
            Console.WriteLine("City: {0}", Sender.City1);
            Console.WriteLine("State: {0}", Sender.State1);
            Console.WriteLine("Zip: {0}", Sender.ZipCode1);
            Console.WriteLine("Weight of package: {0:F2}", Sender.Weight1);
            Console.WriteLine("Cost of package: {0:C}", Sender.Cost1);
         
            Console.WriteLine(TwoDayPkg.ToString());
            Console.WriteLine(OverNightPkg.ToString());
           
        }
    }
}

---

This is why. Look closely at what you are returning.

Code:

---

public string State1
{
    get
    {
        return State1;
    }//end get
}

---

That is an example of infinite recursion.

This is one argument against naming private instance members as you do. in C#, private member variables usually begin with an underscore and are followed by a lowercase letter (same with local variables.) So, "State" becomes _state. This is of course not a hard rule, but it is idiomatic and generally accepted as the style to use by the C# community.

Also, you have a lot of comments that are absolutely useless. I know that almost all teachers require comments like that, so if this is a school project I understand, but n the real world comments like that just clutter up the code and add no value. Comments are supposed to explain *why* the code does what it does, not *what* the code does. Any programmer can tell what the code is doing by simply reading it, no comments required.

StackOverflowExceptions occur when you have tried to call too many methods deep into the callstack. This is usually a sign of recursion without a base case or two methods which circularly call each other. In this case, the problem can be solved by modifying the Getter for State1 in the Package class. It currently reads:

Code:

---

        public string State1
        {
            get
            {
                return State1;
            }//end get
        }// end property State1

---

When you order it to return State1, it calls the State1 getter again, which in turn calls the State1 getter... until you run out of stack space.

It is easily corrected by replacing it with:

Code:

---

        public string State1
        {
            get
            {
                return State;
            }//end get
        }// end property State1

---

Which will return the member variable State of package rather than calling the getter again.

This sort of problem can be avoided by using some common conventions. Often, I use lowercase letter to name the member variables of my classes and Uppercase letters to name their getters/setters. Another common convention is to preceed member variables in the class with an underscore (_) to remember that they are member variables and not exposed.

Note that solving that problem exposes another, but I will let you play with the debugging on that. What debugger/IDE are you using? Visual Studio is an excellent choice. There are some others that are good too. My favorite free, open-source one is SharpDevelop which you can get here: http://www.icsharpcode.net/opensource/sd/. A good IDE with a good debugger is a programmer's best friend. I understand though why you might be confused if this was your first encounter with StackOverflowExceptions.

As a general note too, unless your instructor explicitly requires you to comment all curly brace closures ( } ), I would omit them. They merely clutter the code which hinders readability without actually convening that much information.

I hope that helps!

Quote:

---

Originally Posted by BioPhysEngr

StackOverflowExceptions occur when you have tried to call too many methods deep into the callstack.

---

We posted the same exact response :D

To be a bit pedantic though, a stack overflow does not occur when you call too many methods, it occurs when you exceed the amount of memory allocated to the stack space of the current thread. Of course, infinite recursion is a way to cause that, but there are other ways as well.

Yes, good point. I don't think I can remember the last time I caused it by any other method in C# though. Thanks for the clarification; it is well worth remembering.

Yeah, it's pretty rare to be anything other than this in C# due to most objects being allocated on the heap. It would take a struct with a lot of stack allocated fields/member variables to overrun the stack space.

Guys,
Thanks a bundle! You'll have to excuse my newbieness, I only had 1 semester in C++ prior to this, but luckily this is my last programming class I need for my EE degree. Everyone said the transition from C++ to C# would be easy, but to be honest I REALLY don't get it(I wanted to do java). I commented the living crap out of my code so that I could keep MYSELF in line, and the instructor has no issues with it.

Again, I'll try some of the changes you guys mentioned and report back, thanks guys!

***Update***

I'm back to square one it seems.. I changed it to return State instead of State1, and the program compiles.

I'm in VS2008 and everything works until I run the program..then I get the following command prompt error.


"
Unhandled Exception: System.FormatException: Index (zero based) must be greater
than or equal to zero and less than the size of the argument list.
at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String fo
rmat, Object[] args)
at System.String.Format(IFormatProvider provider, String format, Object[] arg
s)
at System.String.Format(String format, Object[] args)
at Lab2.Package.ToString() in C:\Documents and Settings\toast\My Documents\Vi
sual Studio 2008\Projects\Package Program\Package Program\Program.cs:line 120
at Lab2.PackageTest.Main(String[] args) in C:\Documents and Settings\toast\My
Documents\Visual Studio 2008\Projects\Package Program\Package Program\Program.c
s:line 235
Press any key to continue . . .
"

Arrrggghhh =/ Lemme keep looking some stuff up but can someone let me know as to whats still going wrong here =[

Truncating the format string (or providing the additional operands) may help ...

Code:

---

"{0}: {1} {2}: \n{3}: {4}\n{5}: {6} \n{7}: {8}\n{9}: {10}: \n{11}: {12} \n{13:F2}: {14} \n{15:C}: {16}",

---

I lopped off everything after {8}\n and it ran to completion .... did you forget to add the operands to support the format ?

Another thought ... just noticed that you might wanna add a "\n" here and there ... I don't think the display is quite what you had in mind.

If you run the debugger in the 'start debugging' mode with no breaks set, the debugger comes to a halt at the offending statement. MS really has equipped VS with a world-class debugger (IMHO) (an' the Exception printout is also very informative - what a great IDE !).

Once you understand what is causing the stack overflow issue is to figure out how to prevent the problem from never happening again.

One way to do this is to adopt a consistent property/field naming convention.

One popular C# naming convention is to name Properties as Pascal case and Fields as camel case with a leading underscore.

Code:

---

public string State { get { return _state; } }
private string _state;

---

In this style, all local variables/ctor or method parameters get named as camel case (without the leading underscore)

This avoids having to use 'this.' to disambiguate params from class fields.

Code:

---

public Package( string state )
{
  _state = state; // no problem
}

---

vs (when leading underscore isn't used to denote class fields)

Code:

---

public Package( string state )
{
  this.state = state;  // this works, but it's ugly to some folks
}

---

Another way to avoid issues is to use an auto property

Code:

---

public string State { get; set; }

---

In fact, auto properties allow you to set access levels. For example, a public readonly property with a private setter would look like this:

Code:

---

public string State { get; private set; }

---

Code:

---

public Package( string state )
{
  State = state;
}

---

I generally try to use autoproperties whenever possible because it reduces code clutter (imo).

Quote:

---

Originally Posted by jetter2

Everyone said the transition from C++ to C# would be easy, but to be honest I REALLY don't get it(I wanted to do java).

---

Yeah, they didn't know what they were talking about :). The biggest similarity between C# and C++ is the syntax, pretty much everything else is different. You would have had the same issue going to java, which is similar in many ways to C# (well, probably the other way around since java came first, but C# has outdone java imo)

Quote:

---

Originally Posted by ThermoSight

Truncating the format string (or providing the additional operands) may help ...

Code:

---

"{0}: {1} {2}: \n{3}: {4}\n{5}: {6} \n{7}: {8}\n{9}: {10}: \n{11}: {12} \n{13:F2}: {14} \n{15:C}: {16}",

---

I lopped off everything after {8}\n and it ran to completion .... did you forget to add the operands to support the format ?....

---

So wait, you closed the entire program after {8}/n ? What exactly did you edit out..can you post the code chunk that compiled for you?

Quote:

---

Originally Posted by BigEd781

Yeah, they didn't know what they were talking about :). The biggest similarity between C# and C++ is the syntax, pretty much everything else is different. You would have had the same issue going to java, which is similar in many ways to C# (well, probably the other way around since java came first, but C# has outdone java imo)

---

Bah! I'm a EE major as it is, but I still somewhat enjoy programming (I'm a network engineer by trait so coding always kinda seemed foreign to me) but C++ was WAY easier to pickup!

Oh Boy am I ever embarrassed !


Yup, you were right to question my action. Yeah, lopping off everything after the 8}\n would fix it too, but that is excessive. The real problem was the {16}, so i changed it to ...
"{0}: {1} \n{2}: {3}: \n{4} {5}: \n{6} {7}: \n{8} {9}: \n{10}: {11}: \n{12} {13:F2}: \n{14} {15:C}\n ",

that's what happens when one makes a change and doesn't even give it a second thought (some might say "or even a first thought")

thank you for pointing out my error.

Quote:

---

Originally Posted by BigEd781

[...] but C# has outdone java imo

---

He, he, he... If some of those Java developers who feel Microsoft is the root of all evil ever get a hold of you...
:)

Quote:

---

Originally Posted by ThermoSight

Oh Boy am I ever embarrassed !


Yup, you were right to question my action. Yeah, lopping off everything after the 8}\n would fix it too, but that is excessive. The real problem was the {16}, so i changed it to ...
"{0}: {1} \n{2}: {3}: \n{4} {5}: \n{6} {7}: \n{8} {9}: \n{10}: {11}: \n{12} {13:F2}: \n{14} {15:C}\n ",

that's what happens when one makes a change and doesn't even give it a second thought (some might say "or even a first thought")

thank you for pointing out my error.

---

Thermo, I really appreciate this!

Here is my REAL question (to all you guys)..

As I said before, I'm an Engineering major and I am in part 2 of my programming sequence. Part 1 was just C++ all the way up to structs, now in semester 2 of the sequence you can either take Java, more C++ or C#.
I work full time and the only class I could get into was the C# class. Are there any forums/link/books that I can take up that will help ease the conversion from C++ to C#? Our professor talks like he expects us to understand this already and I just want to get through this course!

Thanks again guys!

re additional sources, it sounds as though you don't have a great deal of time what with taking courses AND working full time, but as I was telling someone else earlier this week ...


I have several good books here that I've found exceptionally helpful, for instance ...
(in no particular order)
MCTS Exam 70-505: Microsoft .NET Framework 3.5 - Windows Forms Application Development Training Kit / (Microsoft Press)
MCTS Exam 70-536: Microsoft .NET Framework 3.5 - Application Development Foundation Training Kit / (Microsoft Press)
Visual C# 2008 - Step by Step by John Sharp / (Microsoft Press)
Pro C# 2008 and the .NET 3.5 Platform by Andrew Troelsen / (Apress)

and several books by Deitel (http://www.deitel.com/) including Visual C# 2010 - How To Program.

I think of Deitel as The Greatest even though Visual C# 2010 lacks a chapter on multithreading - although that chapter may reside on their website (they have additional chapters for this book on the web - available to those who purchase the book). I am and remain a Deitel fan and have been ever since acquiring my first Deitel book: "Visual C++ .NET - How To Program". I have four Deitel books in all.

I also have three or four books on C++ .NET which are readily applicable to C# - with minor adjustment for language differences.



those are my suggestions; admittedly all but the Deitel book are last-generation but they remain relevant. Perhaps you can purchase their current editions.

bill