FileSystemWatcher .Path string

Hi, I've been trying to find out why a path string is not being accepted as a valid path to set up a FileSystemWatcher in some code, and haven't found any solution as to what format it needs to be in. Here's my code:

Code:

---


Dim plnPair(1) As String

Public Sub SetupFileWatcher(fswBase As String, fswTarget As String, fswFilter As String, SyncObject As Form)

            If fswBase.Length = 0 Then
                Return
            End If

            plnPair(0) = fswBase
            plnPair(1) = fswTarget

            For Each plnPath As String In plnPair
                Me.BeginInit()
                Me.SynchronizingObject = SyncObject
                Me.InternalBufferSize = 32768
                Me.IncludeSubdirectories = True
                Me.Filter = fswFilter
                Me.Path = plnPath
                Me.NotifyFilter = NotifyFilters.FileName Or NotifyFilters.CreationTime

                AddHandler Me.Created, New FileSystemEventHandler(AddressOf Me.OnCreated)
                AddHandler Me.Deleted, New FileSystemEventHandler(AddressOf Me.OnDeleted)

                Me.EnableRaisingEvents = True
                Me.EndInit()
                MessageBox.Show(plnPath)
            Next

        End Sub

---

The code is executing, because the MessageBox shows the paths that are being set up, but the FileSystemWatcher is not starting as expected. I found that if I insert the string value in the path statement manually, it sets up as expected; for instance, when I write:

Code:

---

Me.Path = "c:\users\user\Pictures\Camera Roll"

---

This sets up the watcher as it should. But if I use the variable plnPath as it is in my code, it doesn't set up, as if the format is not being read as a string. I tried:

Code:

---

Me.Path = CType(plnPath, String)

---

This didn't get the desired result either. So I'm not sure what the issue is, and if anyone can suggest how I may be making a mistake, let me know. Thanks....

Spoke too soon....I left the code altered and thought I had fixed the problem but I hadn't. Here's what I tried:

Code:

---

plnPair(0) = """" + fswBase + """"
plnPair(1) = """" + fswTarget + """"

---

Sorry for the false alarm. I also tried:

Code:

---

plnPair(0) = "'" + fswBase + "'"
plnPair(1) = "'" + fswTarget + "'"

---

but this isn't valid either. So I'm back to square one trying to find the right format. The one statement that works is:

Code:

---

Me.Path = fswBase

---

That string format is valid. Any suggestions as to how I'm looking at this would be appreciated. I'm sure it's something basic, don't you think?

Put a breakpoint on the line Me.Path = fswBase, run the program in debug mode and hover over the fswBase variable to see what its value is. Most like it isn't the correct value.

Quote:

---

Originally Posted by Arjay

Put a breakpoint on the line Me.Path = fswBase, run the program in debug mode and hover over the fswBase variable to see what its value is. Most like it isn't the correct value.

---

Thanks for the suggestion, Arjay. I set the breakpoint and found out better how to use it. Turns out the variable was the right one and in the right format. What I found out was that I was using the For Next incorrectly. I was calling one instance of the class, and simply rewriting the object over with each Next iteration. So basically, the last path that was being set was the only path that was active. What I had to do was set a separate instance for each directory like this:

Code:

---

FSWatcher = New Watcher(lstReader.Item(1).ToString(), "*", "", Me, Nothing)
FSWatcher = New Watcher(lstReader.Item(2).ToString(), "*", "", Me, Nothing)

---

After than each directory was set to it's own FileSystemWatcher object, and the correct directories were being monitored. I hope this is helpful for others working through the same thing.

Glad you got it working but it looks like you are only setting one variable (FSWatcher) in your last code snippet. Is that a typo?

Quote:

---

Originally Posted by Arjay

Glad you got it working but it looks like you are only setting one variable (FSWatcher) in your last code snippet. Is that a typo?

---

I don't think so, if I understand you correctly Arjay. Each call is a new instance of FSWatcher with a separate variable. The first is Item(1), the second is Item(2)...that comes from an ExecuteReader block just before the call. Did I understand you correctly? I'll probably be posting more along the FileSystemWatcher subject as I move along with my project. I'm new to this, and learning. Thanks for your input.

Yes, it's a different instance but you are storing both instances in the same variable (and the 2nd instance overwrites the first). For you to need to have two instances running in parallel, you'll need:

Code:

---

FSWatcher1 = New Watcher(lstReader.Item(1).ToString(), "*", "", Me, Nothing)
FSWatcher2 = New Watcher(lstReader.Item(2).ToString(), "*", "", Me, Nothing)

---

I see what you're saying...in that case I'd have to have a separate memory allocation for each instance right? Such as:

Code:

---

Dim FSWatcher1 As Watcher
Dim FSWatcher2 As Watcher
...etc.,

---

I've tried to assign an ID of sorts to a statement like that, but haven't found a way to do it on the fly. Do you know how this can be done?

I'm a C# programmer so my syntax will be wrong but you can store multiple FileSystemWatcher instances in a generic list.

Make the generic List a class property.

In C# it would be something like

Code:

---

List<FileSystemWatcher> _fswList = new List<FileSystemWatcher>();

---

Then inside the SetupFileWatcher method, you would create the fsw instances and add them to the list.

Code:

---

foreach(var item in lstItem)
{
  var fsw = new FileSystemWatcher(item.Path, ...); // pseudo code from your earlier snippet
  // other fsw initialization here
 
  // add the item to the fsw list
  _fswList.Add(fsw);
}

// loop through the list and start watching
foreach(var fsw in _fswList)
{
  fsw.EnableRaisingEvents = true;
}

---

Good suggestions Arjay. I'm working on ways to incorporate the ideas into what I'm doing. I don't know, though, how to recall a particular item from the list to stop watching it, or then start watching again. I know that Lists are indexed, but how do I know what index or item to call up when I need to?

It depends on how you are adding items to watch and what you want to do to manage them do you add them from a list or all together? Do you want to manage them all together, individually or both ways?

Quote:

---

Originally Posted by Arjay

It depends on how you are adding items to watch and what you want to do to manage them do you add them from a list or all together? Do you want to manage them all together, individually or both ways?

---

Welp, I'm adding them in startup from a database, so the recursive aspect is handled by OleDbReader and each instance of FileSystemWatcher is individually added to the list you suggested. Managing, I think, would be both ways...I'd like to stop watching for an individual directory as needed, but also shut down all monitoring of folders as a group if that's clicked for.

By your previous example, I would think it would be easy to set a recursive function to shut all items in a list down...it's the individual I don't understand. How do I filter one instance and pause it as needed. I'm fuzzy on that.

Sematics-wise, walking a list with foreach in my example isn't recursion. Regardless of the fsw instance, how do you expose the list of filtered fsw's to the user? Does the user see a grid with rows that display the folder being monitored?

Quote:

---

Originally Posted by Arjay

Sematics-wise, walking a list with foreach in my example isn't recursion. Regardless of the fsw instance, how do you expose the list of filtered fsw's to the user? Does the user see a grid with rows that display the folder being monitored?

---

After the user chooses directories to sync, I store those choices in a database, sync the directories, and then update a list box with the new user name for the sync plan. After a new plan is added, or changed, or deleted, I update the list. When the user clicks on a sync plan, the corresponding directories are displayed to the left where they can see folders which are monitored.

So if a sync plan is clicked, I need to be able to recall that object, and disable the events watch on those directories. If they click onto other plans, and return to that one, the Pause button reads the status of that sync plan...to Pause, or Start. This status is updated in the database and recalled when the user clicks the Pause/Start button.

That's basically the idea. I'm flexible, but working with what I know as a learning experience. I have to admit I'm new to Lists and Collections...haven't really done much but read about them. It'll just take time and practical experience to get to know them effectively.

There a a few approaches. One is you bind the ui list to your underlying list collection. The the click can access the current item in the list. If you aren't binding, then when you insert the ui list rows from the list collection, add a tag with the index to the current list position. When a click occurs, retrieve the tag value and use it to retrieve the item.

Quote:

---

Originally Posted by Arjay

There a a few approaches. One is you bind the ui list to your underlying list collection. The the click can access the current item in the list. If you aren't binding, then when you insert the ui list rows from the list collection, add a tag with the index to the current list position. When a click occurs, retrieve the tag value and use it to retrieve the item.

---

Sounds like binding the ui list to the collection is the more concise approach. I've done some binding of data before, but I don't know if it's what you're referring to.

This topic has sort of deviated from the original title...should it be moved into a new thread to accommodate the new topic of interest?

No need to move the thread. How are you displaying the list in the ui (feel free to start a new thread if you like)?

Quote:

---

Originally Posted by Arjay

No need to move the thread. How are you displaying the list in the ui (feel free to start a new thread if you like)?

---

Up to this point I haven't used the list for the ui. The only plan I had for it was to recall the plan object and enable or disable it from the list. I update the ui when there are changes, but that's done reading the database. I probably need more experience with lists. Give me your input on it.

Quote:

---

Originally Posted by KGCole

Up to this point I haven't used the list for the ui. The only plan I had for it was to recall the plan object and enable or disable it from the list. I update the ui when there are changes, but that's done reading the database. I probably need more experience with lists. Give me your input on it.

---

It depends on how you've implemented your ui list. Zip up a sample solution that shows how a list of items is displayed on a ui. Then I can help you.

Here's the basic method I use to read my database into the listbox. Nothing fancy, just using OleDbDataReader to feed items into the list:

Code:

---

  Public Sub GetPlans()

        Dim myConn As New OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=..\..\Resources\BakDb.accdb")
        Dim cmd As New OleDbCommand

        chkCnt = 0

        Try
            LstBxPlanBackup.Items.Clear()
            str = "SELECT COUNT(*) FROM Backup"
            cmd.CommandText = str
            cmd.Connection = myConn
            myConn.Open()
            cntPlns = Convert.ToInt32(cmd.ExecuteScalar())
            myConn.Close()

            str = "SELECT Nickname, Base, Target FROM Backup"
            cmd.CommandText = str
            cmd.Connection = myConn
            myConn.Open()
            Dim lstReader As OleDbDataReader = cmd.ExecuteReader()
            lstReader.Read()
            Do Until chkCnt = cntPlns
                LstBxPlanBackup.Items.Add(lstReader.Item(0))
                chkCnt += 1
                lstReader.Read()
            Loop
            myConn.Close()
            LstBxPlanBackup.SelectedIndex = 0
        Catch ex As Exception
            myConn.Close()
            LblNickNote1Backup.Text = "Trouble connecting to database to list your plans"
        End Try

        LblNickNote1Backup.Text = ""
        LblNickNote2Backup.Text = ""
        LstBxPlanBackup.SelectedItem = TxtBxNickBackup.Text
        MakePlanStr()
    End Sub

---